M3 x 4 mm cone-point hex-socket set screw (grub screw), DIN 914 / ISO 4027

$9

Listed by hvhindustrial

Buy at hvhindustrial

Description

A 4 mm-long M3 grub screw with a sharp conical tip and a 1.5 mm hex socket — the screw that clamps the wire inside a solderless bullet contact. It has no head, so it winds down flush with the contact's outer face, and the cone both bites into the conductor and self-centres in the hole. One goes into every RCPROPLUS Supra X S6 bullet and into the radial hole of the machined NIU FX Pro contact pin; buy a box of 50-100 for a few dozen baht rather than one at a time, because a dropped grub screw is a lost grub screw.

Specifications

Roleset-screw
Thread SizeM3
Thread Pitch Mm0.5
Length Mm4
Point Typecone
Cone Angle Deg90
Drive Typehex-socket
Hex Key Mm1.5
Socket Depth Min Mm1.2
StandardDIN 914 / ISO 4027
Standard NoteDIN 914 / ISO 4027 is the CONE-point socket set screw. DIN 916 / ISO 4029 is the cup point and DIN 913 / ISO 4026 is the flat point, so a listing titled "DIN 916" is a different tip. The earlier internal note (cad/products/niu-fx-pro-adapter/cnc-contact/HANDOFF.md §5) said "DIN 916 / ISO 4026" for this screw — wrong on both counts; corrected here after checking the standard against two distributors' spec tables.
Headlessyes
MaterialA2 / A4 stainless steel, or black-oxide alloy steel (property class 45H)
Qty Per Kit2
Related Sizes{"threadSize":"M2.5","threadPitchMm":0.45,"lengthMm":4,"hexKeyMm":1.3,"usedFor":"the 4 mm² build of the NIU FX Pro CNC contact pin. A set screw has to be smaller than the wire bore to reach the conductor, so the Ø2.75 mm bore for Ø2.60 mm 4 mm² takes M2.5 and the Ø3.55 mm bore for Ø3.42 mm 6 mm² takes M3. A different SKU (`setscrew-m2-5x4-cone-point-th`), not a variant of this one — and its socket is 1.3 mm (ISO 4027 s = 1.3, min 1.27), not the 1.5 mm this screw takes."}

Parts you’ll need

Please purchase the remaining off-the-shelf parts here to complete the adapter.

Used by

The builds that name this part in their own shopping list.