Solar Panel Kit for the

Every part you need to charge the Sur-Ron Light Bee X from solar panels: a 400W kit sized for 51 km a day, with current USA prices.

Sur-Ron Light Bee X

400W Solar Kit for Sur-Ron Light Bee X

Distance51 km/day

~$670.70

Priced items only · vehicle not included

Estimated payback: about 1.5 years

Roughly $441 a year you no longer spend on gas — about 391 L, the gas a 125cc scooter would burn over your 51 km a day at today's local price.

$2,205

Gas avoided in 5 years

$4,410

Gas avoided in 10 years

Disclaimers — please read

  • This is sizing help, not an engineering approval or an electrical inspection. Installing or using a kit is your decision and your risk. The terms set out what we are and are not liable for.
  • Check the charge plug against your vehicle's socket before you order (gender, pin count and pin positions) — send us a photo if you are unsure.
  • Retailers set their own prices, stock and specs, and listings can change — verify each part that arrives against this list before use.

Your system

Solar Panels Array
100W+−100W+−100W+−100W+−2→12→1
4 × 100W solar panels as 2 parallel strings of 2 in series (2S2P)
Cables+−MC4MC45.26mm²WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703 · 1 × 6.1 m red + black pair98.8% of the voltage arrives in the sun, 99.0% in the shade
Charge ControllerMPPT+−+−MC4screw terminalCallsun DY-MLUE-500W 15 A boost MPPTSteps up voltage from 36V to 67.2V with 97.1% efficiency
Cables+−bare wirebare5.26mm²WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703 · 1 × 6.1 m red + black pair99.8% of the voltage arrives in either the sun or shade
Charge adapter+−bare wirecnlinko-lp20CNLinko LP-20 3-pin male plug (charger side)plug-in adapter · bare lead, no MC4
Scooter Charge PortPORT+−cnlinko-lp20Sur-Ron Light Bee X charge port (CNLinko LP-20 3-pin)
MC4 maleMC4 femalemated pairscrew terminalbare wireXT60i solar input

Some links here are affiliate links. If you buy through them we may earn a commission, at no extra cost to you — it never changes the price you pay, or which parts we recommend. The kit is sized from your vehicle, your daily distance and your local sun. As an Amazon Associate we earn from qualifying purchases.

Core kit

ALLPOWERS SP027 100 W folding panel
400W solar array — 4 × 100W

ALLPOWERS SP027 100 W folding panel

4 × 100W panels wired 2S2P — 36V at 12.0A. Series raises the voltage and lowers the current, so the cable can be thinner. Your 51 km/day needs about 550W. 400W is the largest kit with a charge controller we can source for this scooter, so this recovers most of a day rather than all of it — ride less, or add a second controller and array later.

Buy on Amazon
WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703
DC cable, panel to controller — 4mm² min · 5.26mm² supplied

WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703

Gauge is computed from your current and run length, not assumed. This run loses 1.0% of the voltage (99.0% arrives). Buy 6mm² to reduce the loss to 0.9%.

Buy on Amazon
1 × 6.1 m red + black pairCheck price on Amazon
Callsun DY-MLUE-500W 15 A boost MPPT
MPPT charge controller

Callsun DY-MLUE-500W 15 A boost MPPT

Must accept at least 400W of PV, tolerate the panel's open-circuit voltage, and be settable to 67.2V. Keep it clean, dry, and in the shade (try under your house).

Buy on Amazon
WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703
DC cable, controller to vehicle — 4mm² min · 5.26mm² supplied

WindyNation 10 AWG PV cable pair, 20 ft red + 20 ft black, UL 4703

Gauge is computed from your current and run length, not assumed. This pair arrives with an MC4 on each end: the controller end is cut off and stripped, because a screw terminal takes bare wire. This run loses 0.2% of the voltage (99.8% arrives).

Buy on Amazon
1 × 6.1 m red + black pairCheck price on Amazon
Charge adapter — Sur-Ron Light Bee X

CNLinko LP-20 3-pin male plug (charger side)

Arrives as a plug on its own lead, ending in bare conductors. Terminate it at the bench BEFORE the plug goes near the scooter — its charge port is a live battery terminal, so two loose ends touching is a dead short across the pack. Take the polarity from the OEM charger's plug (an isolated DC output, safe to meter), not from the bike; heat-shrink each conductor, insulate the pins you do not use, and meter for continuity between + and − before the first connection.

Buy on Amazon
KAIWEETS Self-adjusting wire stripper, 10–24 AWG, strip / crimp / cut
Wire cutters and strippers

KAIWEETS Self-adjusting wire stripper, 10–24 AWG, strip / crimp / cut

Every join in the guide starts with "strip 13 mm", and the cable is cut to length first. Most MC4 crimping kits do not include a pair. Its stripping holes stop at 10 AWG (2.6 mm); a 6 mm² conductor is thicker, so strip that end by scoring the insulation with the cutter blade and pulling it off.

Buy on Amazon
AstroAI AM33D digital multimeter, 2000 counts
Multimeter

AstroAI AM33D digital multimeter, 2000 counts

Check polarity and voltage before you connect anything. Continuity, DC volts and a buzzer — nothing a kit this size needs more of.

Buy on Amazon
MAGID M0011R11 Class 00 rubber insulating gloves, size 11
Insulated gloves

MAGID M0011R11 Class 00 rubber insulating gloves, size 11

For the charge port and the battery terminals, where a slip should not mean skin on metal. The 400 V on the listing is the seller's claim on a coated knit glove, not an IEC 60903 test — sensible insurance on an 84 V pack, not a license to work on live conductors.

Buy on Amazon
NoCry Clear safety glasses, anti-fog, wrap-around, ANSI Z87
Safety glasses

NoCry Clear safety glasses, anti-fog, wrap-around, ANSI Z87

Buy the clear lens — the same listing also sells a dark one, which is a sunglass lens and no use in a shed. A step bit throws plastic swarf and a cutter throws copper strands, and both go where you are looking.

Buy on Amazon
BougeRV Solar Y branch connectors, 2-to-1 (1 pair)
MC4 Y-branch connectors

BougeRV Solar Y branch connectors, 2-to-1 (1 pair)

2 parallel strings have to be joined back to one cable — a Y-branch pair per extra string.

Buy on Amazon

Instructions

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant
Solar Kit Assembly Instructions + AI Build Assistant

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant

A step-by-step guide, ours not a retailer's: panel placement, wiring the controller terminals, configuring the MPPT, and verifying polarity and charge voltage with a multimeter. Available on Mobile Web or Desktop. Includes US$5 of AI credits for an AI build assistant. You can send it photos and ask for help at any step. Charged in USD by Lemon Squeezy, so it is shown separately from the parts total.

RecommendedPreview
$19.99

Optional extras

Untick anything you already own.

Weatherproof box for the controller

For an install that gets rained on. A cold, dry, shaded spot is enough on its own — the controller only needs to stay out of the sun and off the ground. Even a cheap box with rubber grommets is fine: it's a rain shelter, not a sealed enclosure, and 4mm² cable is stiff enough that many people leave the lid off. Sealing it takes three more things, and the box alone is useless without them: the glands below (two, one per cable), a drill, and a step bit — a twist bit wanders and leaves an oval no gland can seal. If you have no drill, buy a pre-drilled enclosure instead.

Find on Amazon

Cable glands, locknuts and O-ring washers

One per cable entry, so two for this kit. Only needed if you seal the box — an open hole is a box that fills with water. 4mm² cable is stiff, so many people leave the lid off instead. Buy them as a set — a gland with no locknut cannot be fixed to the wall, and without its rubber O-ring washer it leaks at the hole.

Find on Amazon

Step drill bit

The one tool that decides whether the box seals. A step bit cuts a round, burr-free hole through plastic or thin steel in one pass, and its steps cover every gland size. A twist bit wanders and leaves an oval — a gland cannot seal an oval.

Find on Amazon

Power drill

Most people already own one. Any corded or cordless drill will drive a step bit; slow speed and light pressure is what stops the plastic melting and the hole going out of round.

Find on Amazon

Deburring tool or fine sandpaper

Takes the burr off the inside of the hole. A gland's rubber washer seals against a flat face — a raised burr holds it off, and the box leaks exactly where the cable enters.

Find on Amazon

Wrench or spanner (gland size)

For the gland's locknut. Match it to the gland — PG9 and M20 take different spanners — and take the across-flats figure from the gland's own listing rather than guessing.

Find on Amazon
Cable lock / security tether

WARLION 6 ft x 3/8 in adjustable braided-steel cable lock, dual loop

Theft is the real risk when panels live outside. Recommended if they're not fenced.

Buy on Amazon
Gardner Bender 48-308UVB mounting cable ties, 8 in, 50 lb, UV black (100 pack)
Cable ties and routing clips

Gardner Bender 48-308UVB mounting cable ties, 8 in, 50 lb, UV black (100 pack)

Cheap, and the thing everyone forgets. The sourced pack is 100 cable ties; add routing clips separately if the run needs them.

Buy on Amazon
ECO-WORTHY Ground-mount adjustable panel brackets, 2 sets, 118 in rail, 28.5°–60°
Panel mount or ground stand

ECO-WORTHY Ground-mount adjustable panel brackets, 2 sets, 118 in rail, 28.5°–60°

Not needed if the panel lies on the ground in a fenced spot. Worth it for an angle or a windy site.

Buy on Amazon
Trenching shovel (bury the PV cable)

Truper Tru Pro California trenching shovel, 4 in blade, 47 in ash handle (TRS-4C / 33094)

A 4 in narrow blade and a long handle: it cuts a slot rather than a hole, so a 150 mm trench for the panel cable costs you ten minutes and a strip of lawn. Burying is what keeps the lead out of a mower, a dog's teeth and a child's path — and it is the same shovel for the run to the controller.

Buy on Amazon
MC4 crimping tool

Gazoe Solar PV crimping tool, 2.5 / 4.0 / 6.0 mm² (14–10 AWG), ratcheting

Crimps the MC4 connectors. Many kits don't include cutters or strippers — check yours before you skip the next line.

Buy on Amazon
Tuffenough Solar motion flood light, 2500 lm, 3 heads (2 pack)
Solar lights (garden or security)

Tuffenough Solar motion flood light, 2500 lm, 3 heads (2 pack)

A popular add-on — the panel and sun hours you already have will run them too.

Buy on Amazon

Inline DC fuse and holder

Belt and braces: the controller limits its output and the scooter has its own fuse, so this is not required. Fit one if the vehicle-side run is long, or if you want a fuse you can see and reach. If you do, put it on the vehicle side, close to the scooter — that is the run a fault in the plug would short. The MC4 inline fuse listed suits the panel side; the vehicle side needs a blade-fuse holder on the same gauge.

Find on Amazon

Keep this list

Print it now, or save it as a PDF, if you want a copy of the list to take with you.

The first five years

What five years of running a Sur-Ron Light Bee X actually costs

Cheaper than what?

Cost of ownership, 5 years

51 km/day · vehicle + kit + fuel + upkeep
Sur-Ron Light Bee X + this kitThis model
$5,321 · $0.057/km
NIU XQi3 Street + its kit
$6,190 · $0.067/km
Sur-Ron Light Bee X 10kW + its kit
$6,616 · $0.071/km
Talaria Sting R MX4 + its kit
$5,552 · $0.060/km
Honda Ruckus 49cc (Gas)
$6,264 · $0.067/km
Toyota Corolla (gas)
$44,572 · $0.48/km

How a Sur-Ron Light Bee X charges from solar — and how far a kit takes it →

Not ready to buy yet?

Leave your email and we'll tell you when a cheaper panel or controller turns up for the Sur-Ron Light Bee X, and when the build guide is ready. Occasional and relevant — and one click to leave.

We do not sell or share your address, and every email has an unsubscribe link.