Solar Panel Kit for the

Every part you need to charge the NIU FX Pro from solar panels: a 400W kit sized for 35 km a day, with current Thailand prices.

NIU FX Pro

400W Solar Kit for NIU FX Pro

Distance35 km/day

฿8,939

Priced items only · vehicle not included

Some lines are converted from USD at the regional estimate — each row shows the price its shop charges.

Estimated payback: about 0.9 years

Roughly ฿9,658 a year you no longer spend on petrol — about 268 L, the petrol a 125cc scooter would burn over your 35 km a day at today's local price.

฿48,290

Petrol avoided in 5 years

฿96,579

Petrol avoided in 10 years

Disclaimers — please read

  • This is sizing help, not an engineering approval or an electrical inspection. Installing or using a kit is your decision and your risk. The terms set out what we are and are not liable for.
  • Check the charge plug against your vehicle's socket before you order (gender, pin count and pin positions) — send us a photo if you are unsure.
  • Retailers set their own prices, stock and specs, and listings can change — verify each part that arrives against this list before use.

Your system

Solar Panels Array
200W+−200W+−
2 × 200W solar panels in series (2S)
Cables+−MC4bare6mm²TMDA 6 mm² solar PV cable (PV1-F), sold per metre · 6 m red + 6 m black99.2% of the voltage arrives in the sun, 99.3% in the shade
Charge ControllerMPPT+−+−screw terminalscrew terminalMPPT-7210ASteps up voltage from 40.4V to 82.77V with 96.6% efficiency
Cables+−bare wirebare4mm²TMDA 4 mm² solar PV cable (PV1-F), sold per metre · 4 m red + 4 m black99.8% of the voltage arrives in either the sun or shade
Charge adapter+−screw terminalniu-proprietaryNIU FX Pro charge adapter3D-printed housing · two Ø6 mm set-screw bullets · you assemble
Scooter Charge PortPORT+−niu-proprietaryNIU FX Pro charge port
MC4 maleMC4 femalemated pairscrew terminalbare wireXT60i solar input

Some links here are affiliate links. If you buy through them we may earn a commission, at no extra cost to you — it never changes the price you pay, or which parts we recommend. The kit is sized from your vehicle, your daily distance and your local sun.

Core kit

400W solar array — 2 × 200W

LS-F200M folding 200W (2 × 100W)

2 × 200W panels wired 2S — 40.4V at 10.6A. Series raises the voltage and lowers the current, so the cable can be thinner.

Find on Lazada
2 panelsView price
TMDA 6 mm² solar PV cable (PV1-F), sold per metre
DC cable, panel to controller — 4mm² min · 6mm² supplied

TMDA 6 mm² solar PV cable (PV1-F), sold per metre

Gauge is computed from your current and run length, not assumed. This run loses 0.5% of the voltage (99.5% arrives).

Buy on Lazada
4 m red + 4 m black฿256฿32 each
MPPT charge controller

MPPT-7210A

Must accept at least 400W of PV, tolerate the panel's open-circuit voltage, and be settable to 82.77V. Keep it clean, dry, and in the shade (try under your house).

Buy on Lazada
฿1,920
ScootSolar MPT-7210A Outdoor Safety Shell — 6 mm² in / 4 mm² out (3D-Printable CAD)
MPPT strain-relief & button-locking shell — 6 mm² in / 4 mm² out (3D-printable CAD)

ScootSolar MPT-7210A Outdoor Safety Shell — 6 mm² in / 4 mm² out (3D-Printable CAD)

Your kit uses 6 mm² cable from the panel and 4 mm² cable to the vehicle, so print the 6 mm² in / 4 mm² out variant. Replaces the bulky junction box when your controller sits under an eave or roof: clamps all 4 solar and battery cables in half-round ribbed channels so a trip yank cannot pull bare wires out of the screw terminals, and locks the voltage buttons + screw holes behind a tamper-proof shield while leaving the LCD and cooling fan 100% open.

฿360≈ converted from $9.99
TMDA 4 mm² solar PV cable (PV1-F), sold per metre
DC cable, controller to vehicle — 4mm²

TMDA 4 mm² solar PV cable (PV1-F), sold per metre

Gauge is computed from your current and run length, not assumed. This run loses 0.2% of the voltage (99.8% arrives).

Buy on Lazada
4 m red + 4 m black฿184฿23 each
NIU FX Pro charge adapter
Charge adapter — NIU FX Pro

NIU FX Pro charge adapter

This scooter charges through a connector we have identified. Check the port before you order: if it presents sockets, this plug fits. If it presents pins, you need the opposite gender — ask us before ordering. Either way, meter polarity off your own charger's output.

฿1,500

Wire cutters and strippers

Every join in the guide starts with "strip 13 mm", and the cable is cut to length first. Most MC4 crimping kits do not include a pair.

Not yet sourced
UNI-T UT890C / UT890D+ digital multimeter, 6000 count, True RMS
Multimeter

UNI-T UT890C / UT890D+ digital multimeter, 6000 count, True RMS

Check polarity and voltage before you connect anything. Continuity, DC volts and a buzzer — nothing a kit this size needs more of.

Buy on Lazada
฿3,999

Insulated gloves

For the charge port and the battery terminals, where a slip should not mean skin on metal. The 400 V on the listing is the seller's claim on a coated knit glove, not an IEC 60903 test — sensible insurance on an 84 V pack, not a license to work on live conductors.

Not yet sourced

Safety glasses

Buy the clear lens — the same listing also sells a dark one, which is a sunglass lens and no use in a shed. A step bit throws plastic swarf and a cutter throws copper strands, and both go where you are looking.

Not yet sourced

Instructions

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant
Solar Kit Assembly Instructions + AI Build Assistant

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant

A step-by-step guide, ours not a retailer's: panel placement, cutting and crimping MC4, wiring the controller terminals, configuring the MPPT, and verifying polarity and charge voltage with a multimeter. Available on Mobile Web or Desktop. Includes US$5 of AI credits for an AI build assistant. You can send it photos and ask for help at any step. Charged in USD by Lemon Squeezy, so it is shown separately from the parts total.

RecommendedPreview
฿720≈ converted from $19.99

Optional extras

Untick anything you already own.

ScootSolar PV Cable Bend Guide — 45° Interlocking Segment, 6 mm² (3D-Printable CAD)
PV cable 45° snap-lock bend guide (3D-printable CAD)

ScootSolar PV Cable Bend Guide — 45° Interlocking Segment, 6 mm² (3D-Printable CAD)

Your kit uses 4 mm² (Ø6.1 mm) and 6 mm² (Ø7.2 mm) cables — both STL variants are included in one download. Interlocking 45° segments snap together like a toy train track so stiff solar cables never kink around outdoor corners: 2 segments make a 90° corner, 4 make a 180° U-turn, and 6 make a compact Omega loop in tight spaces. Each joint's shared ring takes one ground anchor through its 6.4 mm ear, so a staked run stays where you laid it.

Nano Junction box NANO-206Y, 202 × 202 × 103 mm, IP65
Weatherproof box for the controller

Nano Junction box NANO-206Y, 202 × 202 × 103 mm, IP65

For an install that gets rained on. A cold, dry, shaded spot is enough on its own — the controller only needs to stay out of the sun and off the ground. Even a cheap box with rubber grommets is fine: it's a rain shelter, not a sealed enclosure, and 4mm² cable is stiff enough that many people leave the lid off. Sealing it takes three more things, and the box alone is useless without them: the glands below (two, one per cable), a drill, and a step bit — a twist bit wanders and leaves an oval no gland can seal. If you have no drill, buy a pre-drilled enclosure instead.

Buy on Lazada
฿145

Cable glands, locknuts and O-ring washers

One per cable entry, so two for this kit. Only needed if you seal the box — an open hole is a box that fills with water. 4mm² cable is stiff, so many people leave the lid off instead. Buy them as a set — a gland with no locknut cannot be fixed to the wall, and without its rubber O-ring washer it leaks at the hole.

Find on Lazada

Step drill bit

The one tool that decides whether the box seals. A step bit cuts a round, burr-free hole through plastic or thin steel in one pass, and its steps cover every gland size. A twist bit wanders and leaves an oval — a gland cannot seal an oval.

Find on Lazada

Power drill

Most people already own one. Any corded or cordless drill will drive a step bit; slow speed and light pressure is what stops the plastic melting and the hole going out of round.

Find on Lazada

Deburring tool or fine sandpaper

Takes the burr off the inside of the hole. A gland's rubber washer seals against a flat face — a raised burr holds it off, and the box leaks exactly where the cable enters.

Find on Lazada

Wrench or spanner (gland size)

For the gland's locknut. Match it to the gland — PG9 and M20 take different spanners — and take the across-flats figure from the gland's own listing rather than guessing.

Find on Lazada

Cable lock / security tether

Theft is the real risk when panels live outside. Recommended if they're not fenced.

Find on Lazada
ELEKTRA Cable ties, 6 in, 3.6 mm (100 pcs)
Cable ties and routing clips

ELEKTRA Cable ties, 6 in, 3.6 mm (100 pcs)

Cheap, and the thing everyone forgets. The sourced pack is 100 cable ties; add routing clips separately if the run needs them.

Buy on Lazada

Panel mount or ground stand

Not needed if the panel lies on the ground in a fenced spot. Worth it for an angle or a windy site.

Find on Lazada

Trenching shovel (bury the PV cable)

A 4 in narrow blade and a long handle: it cuts a slot rather than a hole, so a 150 mm trench for the panel cable costs you ten minutes and a strip of lawn. Burying is what keeps the lead out of a mower, a dog's teeth and a child's path — and it is the same shovel for the run to the controller.

Find on Lazada
KONY VX-9CQK crimping tool with VK-2546 MC4 jaw (2.5–6 mm²)
MC4 crimping tool

KONY VX-9CQK crimping tool with VK-2546 MC4 jaw (2.5–6 mm²)

Crimps the MC4 connectors. Many kits don't include cutters or strippers — check yours before you skip the next line.

Buy on Lazada
฿1,050
1.5 mm hex key

INGCO HHK11091 — 9-piece metric hex key set, 1.5–10 mm

For the charge adapter's set screws. An M3 set screw's socket is smaller than an M3 cap screw's — 1.5 mm, not 2.5 mm.

Buy on Lazada
฿94

Solar lights (garden or security)

A popular add-on — the panel and sun hours you already have will run them too.

Find on Lazada

Inline DC fuse and holder

Belt and braces: the controller limits its output and the scooter has its own fuse, so this is not required. Fit one if the vehicle-side run is long, or if you want a fuse you can see and reach. If you do, put it on the vehicle side, close to the scooter — that is the run a fault in the plug would short. The MC4 inline fuse listed suits the panel side; the vehicle side needs a blade-fuse holder on the same gauge.

Find on Lazada

Keep this list

Print it now, or save it as a PDF, if you want a copy of the list to take with you.

The first five years

What five years of running a NIU FX Pro actually costs

Cheaper than what?

Cost of ownership, 5 years

35 km/day · vehicle + kit + fuel + upkeep
NIU FX Pro + this kitThis model
฿73,339 · ฿1.15/km
NIU NQi GT Sport + its kit
฿148,019 · ฿2.32/km
Felo FW03
฿130,831 · ฿2.05/km
Honda Wave 110i (Gas)
฿129,151 · ฿2.02/km

How a NIU FX Pro charges from solar — and how far a kit takes it →

Not ready to buy yet?

Leave your email and we'll tell you when a cheaper panel or controller turns up for the NIU FX Pro, and when the build guide is ready. Occasional and relevant — and one click to leave.

We do not sell or share your address, and every email has an unsubscribe link.