Solar Panel Kit for the

Every part you need to charge the Viar V3 from solar panels: a 100W kit sized for 30 km a day, with current Indonesia prices.

Viar V3

100W Solar Kit for Viar V3

Distance30 km/day

~Rp 4,778,130

Priced items only · vehicle not included

Some lines are converted from USD at the regional estimate — each row shows the price its shop charges.

Estimated payback: about 2.6 years

Roughly Rp 1,872,450 a year you no longer spend on petrol — about 187 L, the petrol a 50cc moped would burn over your 30 km a day at today's local price.

Rp 9,362,250

Petrol avoided in 5 years

Rp 18,724,500

Petrol avoided in 10 years

Disclaimers — please read

  • This is sizing help, not an engineering approval or an electrical inspection. Installing or using a kit is your decision and your risk. The terms set out what we are and are not liable for.
  • Check the charge plug against your vehicle's socket before you order (gender, pin count and pin positions) — send us a photo if you are unsure.
  • Retailers set their own prices, stock and specs, and listings can change — verify each part that arrives against this list before use.

Your system

Solar Panels Array
100W+−
1 × 100W solar panel
Cables+−MC4bare6mm²6 mm² PV1-F solar cable, per metre · 6 m red + 6 m black99.0% of the voltage arrives in the sun, 99.1% in the shade
Charge ControllerMPPT+−+−screw terminalscrew terminalJNGE MPPT boost charge controller
Cables+−bare wirebare6mm²6 mm² PV1-F solar cable, per metre · 3 m red + 3 m black
Joint+−solder-seal spliceone per conductorCASTA Heat-shrink solder-seal splice kit, 50 pcs with casejoins the adapter's 0.45 m lead to the vehicle cable with a heat gun
Charge adapter+−bare wiretrapesium-3pin3-pin trapezium (品字 / T-type) male plug pigtail, 45 cm lead — 品字公头plug-in adapter · bare lead, no MC4
Scooter Charge PortPORT+−trapesium-3pinViar V3 charge port (3-pin trapezium socket (品字 / T-type e-bike inlet))
MC4 maleMC4 femalemated pairscrew terminalbare wireXT60i solar input

Some links here are affiliate links. If you buy through them we may earn a commission, at no extra cost to you — it never changes the price you pay, or which parts we recommend. The kit is sized from your vehicle, your daily distance and your local sun. As an Amazon Associate we earn from qualifying purchases.

Core kit

Jinyang PV-BX100 folding 100 W panel
100W Foldable solar panel

Jinyang PV-BX100 folding 100 W panel

Sized from your daily distance and local sun hours. The single biggest line item.

Buy on Lazada
Rp 1,875,900
6 mm² PV1-F solar cable, per metre
DC cable, panel to controller — 4mm² min · 6mm² supplied

6 mm² PV1-F solar cable, per metre

Gauge is computed from your current and run length, not assumed. This run loses 0.5% of the voltage (99.5% arrives).

Buy on Lazada
3 m red + 3 m blackRp 141,000Rp 23,500 each
JNGE MPPT boost charge controller
MPPT charge controller

JNGE MPPT boost charge controller

Must accept at least 100W of PV, tolerate the panel's open-circuit voltage, and be settable to your pack's charge voltage. Keep it clean, dry, and in the shade (try under your house).

Buy on Lazada
Rp 685,980
ScootSolar MPT-7210A Outdoor Safety Shell — 6 mm² in / 6 mm² out (3D-Printable CAD)
MPPT strain-relief & button-locking shell — 6 mm² in / 6 mm² out (3D-printable CAD)

ScootSolar MPT-7210A Outdoor Safety Shell — 6 mm² in / 6 mm² out (3D-Printable CAD)

Your kit uses 6 mm² cable from the panel and 6 mm² cable to the vehicle, so print the 6 mm² in / 6 mm² out variant. Replaces the bulky junction box when your controller sits under an eave or roof: clamps all 4 solar and battery cables in half-round ribbed channels so a trip yank cannot pull bare wires out of the screw terminals, and locks the voltage buttons + screw holes behind a tamper-proof shield while leaving the LCD and cooling fan 100% open.

Rp 157,842≈ converted from $9.99
6 mm² PV1-F solar cable, per metre
DC cable, controller to vehicle — 4mm² min · 6mm² supplied

6 mm² PV1-F solar cable, per metre

Gauge is computed from your current and run length, not assumed.

Buy on Lazada
3 m red + 3 m blackRp 141,000Rp 23,500 each
CASTA Heat-shrink solder-seal splice kit, 50 pcs with case
Solder-seal splice for the adapter lead

CASTA Heat-shrink solder-seal splice kit, 50 pcs with case

The charge adapter's lead is only 0.45 m and your run is 3 m, so the two cables have to be joined inside the body. Both ends are thick wire — the adapter's two thickest leads are 10 AWG (about 5 mm²) and the cable is 4 mm² — so use one of the yellow 4.0–6.0 mm² splices in this box. Strip 13 mm of insulation off each end, SLIDE THE TUBE ON FIRST — you cannot get it over the join afterwards — push both ends in until they meet at the solder ring in the middle, then heat it with a heat gun until the ring melts and the tube shrinks onto the insulation. No crimping tool and no soldering iron needed, and the glue inside seals both ends. Pull on it before it cools: a bad join looks exactly like a good one.

Buy on Lazada
Rp 28,888
H&L PRO 1500 W hot air gun
Heat gun

H&L PRO 1500 W hot air gun

Melts the solder ring in a solder-seal splice, and shrinks adhesive-lined heat-shrink over a joint. A 300 W mini gun reaches about 250 °C, which is enough with patience; this 1500 W one is rated 300–520 °C and is the right tool for a join you only want to make once. Never use a lighter: the heat is uneven, the insulation scorches, and the join looks sealed when it is not.

Buy on Lazada
Rp 125,250
Charge adapter — Viar V3

3-pin trapezium (品字 / T-type) male plug pigtail, 45 cm lead — 品字公头

Arrives as a plug on its own lead, ending in bare conductors. Terminate it at the bench BEFORE the plug goes near the scooter — its charge port is a live battery terminal, so two loose ends touching is a dead short across the pack. Take the polarity from the OEM charger's plug (an isolated DC output, safe to meter), not from the bike; heat-shrink each conductor, insulate the pins you do not use, and meter for continuity between + and − before the first connection.

Buy on Amazon
Multifunctional wire stripper and cutter, 10–20 AWG
Wire cutters and strippers

Multifunctional wire stripper and cutter, 10–20 AWG

Every join in the guide starts with "strip 13 mm", and the cable is cut to length first. Most MC4 crimping kits do not include a pair. Its stripping holes stop at 10 AWG (2.6 mm); a 6 mm² conductor is thicker, so strip that end by scoring the insulation with the cutter blade and pulling it off.

Buy on Lazada
Rp 16,586
XL830L digital multimeter
Multimeter

XL830L digital multimeter

Check polarity and voltage before you connect anything. Continuity, DC volts and a buzzer — nothing a kit this size needs more of.

Buy on Lazada
Rp 75,000
Insulated knit work gloves, 400 V (pair)
Insulated gloves

Insulated knit work gloves, 400 V (pair)

For the charge port and the battery terminals, where a slip should not mean skin on metal. The 400 V on the listing is the seller's claim on a coated knit glove, not an IEC 60903 test — sensible insurance on an 84 V pack, not a license to work on live conductors.

Buy on Lazada
Rp 56,100
Safety glasses, clear lens
Safety glasses

Safety glasses, clear lens

Buy the clear lens — the same listing also sells a dark one, which is a sunglass lens and no use in a shed. A step bit throws plastic swarf and a cutter throws copper strands, and both go where you are looking.

Buy on Lazada
Rp 5,500

Instructions

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant
Solar Kit Assembly Instructions + AI Build Assistant

ScootSolar Solar Kit Assembly Instructions + AI Build Assistant

A step-by-step guide, ours not a retailer's: panel placement, cutting and crimping MC4, wiring the controller terminals, configuring the MPPT, and verifying polarity and charge voltage with a multimeter. Available on Mobile Web or Desktop. Includes US$5 of AI credits for an AI build assistant. You can send it photos and ask for help at any step. Charged in USD by Lemon Squeezy, so it is shown separately from the parts total.

RecommendedPreview
Rp 315,842≈ converted from $19.99

Optional extras

Untick anything you already own.

EcoFlow MC4 to XT60 solar cable, 3.5 m
Panel adapter lead — XT60 to MC4

EcoFlow MC4 to XT60 solar cable, 3.5 m

Your panel's output is 5-in-1 lead, not MC4, so it needs one lead to get into the kit's MC4 cable — and its own lead is only about 1.5 m, which will not reach the controller unless the controller sits right beside the panel. This lead is 3.5 m: panel plug → this → MC4 → the panel cable → the controller.

Buy on Lazada
Rp 900,600
MG Junction box 380 × 300 × 120 mm, IP55 (MG 01 12 01)
Weatherproof box for the controller

MG Junction box 380 × 300 × 120 mm, IP55 (MG 01 12 01)

For an install that gets rained on. A cold, dry, shaded spot is enough on its own — the controller only needs to stay out of the sun and off the ground. Even a cheap box with rubber grommets is fine: it's a rain shelter, not a sealed enclosure, and 4mm² cable is stiff enough that many people leave the lid off. Sealing it takes three more things, and the box alone is useless without them: the glands below (two, one per cable), a drill, and a step bit — a twist bit wanders and leaves an oval no gland can seal. If you have no drill, buy a pre-drilled enclosure instead.

Buy on Lazada
Rp 326,054

Cable glands, locknuts and O-ring washers

One per cable entry, so two for this kit. Only needed if you seal the box — an open hole is a box that fills with water. 4mm² cable is stiff, so many people leave the lid off instead. Buy them as a set — a gland with no locknut cannot be fixed to the wall, and without its rubber O-ring washer it leaks at the hole.

Find on Lazada

Step drill bit

The one tool that decides whether the box seals. A step bit cuts a round, burr-free hole through plastic or thin steel in one pass, and its steps cover every gland size. A twist bit wanders and leaves an oval — a gland cannot seal an oval.

Find on Lazada

Power drill

Most people already own one. Any corded or cordless drill will drive a step bit; slow speed and light pressure is what stops the plastic melting and the hole going out of round.

Find on Lazada

Deburring tool or fine sandpaper

Takes the burr off the inside of the hole. A gland's rubber washer seals against a flat face — a raised burr holds it off, and the box leaks exactly where the cable enters.

Find on Lazada

Wrench or spanner (gland size)

For the gland's locknut. Match it to the gland — PG9 and M20 take different spanners — and take the across-flats figure from the gland's own listing rather than guessing.

Find on Lazada

Cable lock / security tether

Theft is the real risk when panels live outside. Recommended if they're not fenced.

Find on Lazada

Cable ties and routing clips

Cheap, and the thing everyone forgets. The sourced pack is 100 cable ties; add routing clips separately if the run needs them.

Find on Lazada

Panel mount or ground stand

Not needed if the panel lies on the ground in a fenced spot. Worth it for an angle or a windy site.

Find on Lazada

Trenching shovel (bury the PV cable)

A 4 in narrow blade and a long handle: it cuts a slot rather than a hole, so a 150 mm trench for the panel cable costs you ten minutes and a strip of lawn. Burying is what keeps the lead out of a mower, a dog's teeth and a child's path — and it is the same shovel for the run to the controller.

Find on Lazada
MC4 crimping tool, 2.5–6 mm²
MC4 crimping tool

MC4 crimping tool, 2.5–6 mm²

Crimps the MC4 connectors. Many kits don't include cutters or strippers — check yours before you skip the next line.

Buy on badank Electronic
Rp 208,550

Heat-shrink sleeve for the joint

For a Western Union splice, or to add a second seal over a splice that did not shrink onto the insulation. Slide it on BEFORE you twist or solder — you cannot get a tube over a finished joint. 20 mm expanded fits over the splice and shrinks onto both cable jackets; two per kit, one per polarity.

Find on Lazada

Solar lights (garden or security)

A popular add-on — the panel and sun hours you already have will run them too.

Find on Lazada
MC4 inline DC fuse, 1000 V / 30 A (2 pcs)
Inline DC fuse and holder

MC4 inline DC fuse, 1000 V / 30 A (2 pcs)

Belt and braces: the controller limits its output and the scooter has its own fuse, so this is not required. Fit one if the vehicle-side run is long, or if you want a fuse you can see and reach. If you do, put it on the vehicle side, close to the scooter — that is the run a fault in the plug would short. The MC4 inline fuse listed suits the panel side; the vehicle side needs a blade-fuse holder on the same gauge.

Buy on badank Electronic
Rp 71,780

Keep this list

Print it now, or save it as a PDF, if you want a copy of the list to take with you.

The first five years

What five years of running a Viar V3 actually costs

Cheaper than what?

Cost of ownership, 5 years

30 km/day · vehicle + kit + fuel + upkeep
Viar V3 + this kitThis model
Rp 10,973,130 · Rp 200.42/km
Exotic Cooltech AX + its kit
Rp 9,072,112 · Rp 165.70/km
Genio Attura FL2 + its kit
Rp 12,946,044 · Rp 236.46/km
Goda 001 + its kit
Rp 10,469,112 · Rp 191.22/km
Honda BeAT 110cc (Gas)
Rp 48,178,000 · Rp 879.96/km

Not ready to buy yet?

Leave your email and we'll tell you when a cheaper panel or controller turns up for the Viar V3, and when the build guide is ready. Occasional and relevant — and one click to leave.

We do not sell or share your address, and every email has an unsubscribe link.