TVS iQube 3.5 kWh

Electric scooter · 2026

Battery
51.7 V · 67.7 Ah3,500 Wh · Li-ion
Top speed
82 km/h
Range
145 km
Consumption
24.1 Wh/kmestimated
$1,298official store · Nov 2026Buy at TVS

Can You Solar Charge a TVS iQube 3.5 kWh?

Yes, You Can!Direct DC Solar Compatible

No AC inverter needed · No $500 power station · Plugs into the TVS iQube charge port port

A 300 W solar array (3 × 100 W in series) feeding a DC boost MPPT controller recovers a 35 km/day commute on the TVS iQube 3.5 kWh in about 4.2 peak sun hours (5.4 sun hours/day market average). The iQube 3.5 kWh uses a 51.7 V 3,500 Wh Li-ion pack (recorded OEM charger ceiling: 58.8 V DC, confidence: Medium, source — always read your own charger nameplate & verify with a multimeter) and charges through its TVS iQube charge port.

TVS iQube 3.5 kWh — 300 W solar charging kit

300 W Solar Array

3 × 100 W (3S)

~4.2 hrs sun for 35 km

Daily 35 km commute recovery

~1.2 yr payoff vs. gas

Saves ~$335/yr

Complete kit total: $404 · sized for a 35 km/day commute

2 · Kit Cost, Payoff Period & Direct DC Efficiency

Should You Solar Charge Your TVS iQube 3.5 kWh?

Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership versus a new gas scooter, air and noise pollution, and local legal rules in India — so you can decide for yourself.

How much does a solar kit for a TVS iQube 3.5 kWh cost?

$404 Complete 300 W Kit3 × 100 W Panels + Boost MPPT + Cables & Plug

A complete direct-DC solar charging kit for the TVS iQube 3.5 kWh costs $404 (including 3 × 100 W monocrystalline panels, a DC boost MPPT controller, sized solar cables, and the matched TVS iQube charge port plug) — roughly one-third the cost of a portable power station setup.

View Parts List →Itemized 3 × 100 W panels, MPPT, cables & TVS iQube charge port plug

Will You Save Money over Gas?

Yes — ~1.2 Yr Payoff vs. Gas

10-Year Cumulative Fuel Savings — TVS iQube 3.5 kWh

vs. buying gas (~$335/yr)vs. wall-outlet electricity (~$33/yr)
$0$1,007$2,013$3,020$4,026Yr 0Yr 1Yr 2Yr 3Yr 4Yr 5Yr 6Yr 7Yr 8Yr 9Yr 10Kit Cost: $404Payoff vs. Gas: ~1.2 yrsvs. Wall (~12.4 yr payoff)

~1.2 yrs

Payoff breakeven vs. buying gas (~$335/yr)

~12.4 yrs

Payoff breakeven vs. wall outlet (~$33/yr)

+$3,622

Net profit vs. gas by Year 10 ($391 in grid kWh avoided)

⚡ Head-to-Head Ownership Cost

Is a solar-charged TVS iQube 3.5 kWh really cheaper than petrol?

☀️ Solar-Charged EV🏆 Cheapest
TVS iQube 3.5 kWh

TVS iQube 3.5 kWh + Solar

3.5 kWh Li-ion · 82 km/h · 145 km range

$1,851/5 yrs

Vehicle Price$1,298
Solar Kit + 0 Fuel$404
Service & Tax (5 yrs)$150
VS
⛽ Gas Scooter (Petrol)
Honda Activa 6G 110cc (Gas)

Honda Activa 6G 110cc (Gas)

110cc · 47.6 km/L · 85 km/h

$1,922/5 yrs

Vehicle Purchase Price$0
5-Yr Petrol (+4%/yr)$1,922
Oil, CVT & Tax (5 yrs)$0
Saves $71 over 5 years
35 km/day · incl. purchase price
Energy Cost / 100 km
$0 (Solar)vs.$3
Top Speed
82 km/hvs.85 km/h
Annual Maintenance
$18vs.$0

Why direct DC boost beats a portable power station

Solar Efficiency

Share of panel wattage that reaches the battery

Direct DC Boost (Panel → MPPT → Bike)95%
Portable Power Station (DC → AC → DC)72%

Charges the TVS iQube 3.5 kWh's own 3,500 Wh pack directly without wasting 25–28% of your solar wattage in a DC→AC→DC inverter loop.

Zero home breaker stress (off-grid ready)

Solar Daytime Charging0 W grid draw
Factory AC Charger (on 900 VA breaker)450 W (50%)

Draws 0 W from your home breaker vs. 450 W from the factory AC brick — preventing breaker trips and charging in unpowered sheds or carports.

Will Solar-Charging a TVS iQube 3.5 kWh Reduce Air Pollution (CO₂ & PM2.5)?

Yes — 0 g Tailpipe, −98% CO₂ & −88% Fine PM2.5 Particles

In India, the utility power grid averages 710 g CO₂/kWh (73% coal/fossil share). Charging your TVS iQube 3.5 kWh directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:

Carbon Emissions per Kilometer (g CO₂/km)

51 g/km
125cc Gas ScooterPetrol exhaust
20 g/km
iQube 3.5 kWh (Wall Grid)710 g CO₂/kWh (India)
1 g/km
iQube 3.5 kWh (Solar Kit)−98% vs. gas

Breathable PM2.5 Air Particles (mg PM2.5/km)

28 mg/km
125cc Gas ScooterExhaust soot + brake wear
9.5 mg/km
iQube 3.5 kWh (Wall Grid)Coal plant + tire wear
3.5 mg/km
iQube 3.5 kWh (Solar Kit)0 exhaust soot (−88%)

Sources: Central Electricity Authority (CEA) India CO2 Baseline Database (~710 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.

Will Driving a Solar-Charged TVS iQube 3.5 kWh Reduce Noise Pollution?

Yes — ~80% Quieter to the Human Ear (53 dBA vs. 76 dBA)

Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The TVS iQube 3.5 kWh's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:

84 dBA
125cc Gas (Accelerating)Loud urban traffic
76 dBA
125cc Gas (30 km/h Cruise)~5× louder than EV
53 dBA
iQube 3.5 kWh (30 km/h Cruise)Quiet conversation level
0 dBA
Solar Kit ChargingNo engine noise — unplug the MPPT fan

Is It Legal to Solar-Charge a TVS iQube 3.5 kWh in India?

Yes — 100% Legal & No DISCOM Net-Metering Approval Needed in IndiaCEA Technical Standards for Connectivity (Off-Grid Standalone Exemption)

Relevant authority: DISCOM & Ministry of New and Renewable Energy (MNRE)

State DISCOM net-metering approvals apply only to grid-synchronized AC solar inverters. A standalone off-grid DC solar kit (< 60 V DC) that charges an electric two-wheeler directly is completely independent of your home AC meter and requires no DISCOM inspection or fee.

  • No DISCOM Net-Metering Needed: 100% isolated from the 230V AC utility supply.
  • Low-Voltage DC (< 60 V): Safe direct DC boost charging with no AC inverter.
  • Zero Wiring Changes to Home: Ideal for courtyards, carports, and apartments.

Ride more or less than 35 km/day? Adjust your daily distance, panel mounting, and cable runs for the TVS iQube 3.5 kWh:

Size Your iQube 3.5 kWh Kit →

2a · Head-to-head

How does it compare to popular EVs?

Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (35 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.

Price

new vehicle price
TVS iQube 3.5 kWhThis model
$1,298
Honda Activa e:
$1,430
Honda QC1
$1,080
Suzuki e-Access
$2,244
Yamaha AEROX E
$3,352

Top Speed

TVS iQube 3.5 kWhThis model
82 km/h
Honda Activa e:
80 km/h
Honda QC1
50 km/h
Suzuki e-Access
71 km/h
Yamaha AEROX E
96 km/h

Range

TVS iQube 3.5 kWhThis model
145 km
Honda Activa e:
102 km
Honda QC1
80 km
Suzuki e-Access
95 km
Yamaha AEROX E
117 km

Battery Size

TVS iQube 3.5 kWhThis model
3.5 kWh
Honda Activa e:
3.0 kWh
Honda QC1
1.5 kWh
Suzuki e-Access
3.1 kWh
Yamaha AEROX E
3.0 kWh

Motor Wattage

TVS iQube 3.5 kWhThis model
4.4 kW
Honda Activa e:
6 kW
Honda QC1
1.8 kW
Suzuki e-Access
4.1 kW
Yamaha AEROX E
9.5 kW

Solar Chargeable

— = no plug on record yet
DC charging
AC charging
TVS iQube 3.5 kWhThis model
DC charging: not recorded
AC charging: Yes
Honda Activa e:
DC charging: No
AC charging: Yes
Honda QC1
DC charging: No
AC charging: Yes
Suzuki e-Access
DC charging: No
AC charging: Yes
Yamaha AEROX E
DC charging: No
AC charging: Yes

Cost per km (5 years)

incl. vehicle + kit + upkeep
TVS iQube 3.5 kWhThis model
$0.03/km
Honda Activa e:
$0.03/km
Honda QC1
$0.02/km
Suzuki e-Access
$0.05/km
Yamaha AEROX E
$0.06/km

Cost per km (10 years)

incl. vehicle + kit + upkeep
TVS iQube 3.5 kWhThis model
$0.02/km
Honda Activa e:
$0.02/km
Honda QC1
$0.01/km
Suzuki e-Access
$0.02/km
Yamaha AEROX E
$0.03/km

3 · Solar Kit Parts for TVS iQube 3.5 kWh

What do you need to solar charge a TVS iQube 3.5 kWh?

Click any part below to open the full parts list with safety disclaimers & live retailer links, or customize your daily distance and cable lengths in the free kit configurator:

Estimated core kit total: $404

See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.

Watch: 3D Solar Kit Assembly & Safe Wiring Sequence in Action

Placing the panel in full sun, landing PV and battery leads into the dead MPPT terminals first, verifying CV target voltage on the lit LCD, and closing the strain-relief armor.

4 · Complete BOM, 16-Step Assembly Guide & Safe Verification

How to Charge a TVS iQube 3.5 kWh With Free Solar Power

To charge a TVS iQube 3.5 kWh directly from sunlight without an AC inverter or portable power station, a 300 W solar array (3 × 100 W wired in 3S series) feeds a DC-DC boost MPPT controller that steps the array's 54 V Vmp up to your 51.7 V pack through its TVS iQube charge port. We built two products specifically for the TVS iQube 3.5 kWh so you never have to guess a part, wire gauge, or assembly step:

Product 1 · Free Bill of Materials (BOM)Free Access

Your TVS iQube 3.5 kWh Parts List (BOM)

Itemizes every required component and safety tool for your iQube 3.5 kWh kit (estimated core total $404) with direct retailer links — cleanly separated from optional extras so you never overbuy:

  • Required Core Hardware (6 items): 3 × 100 W solar panels, DC boost MPPT controller, 4 mm² panel cable (5 m run), 4 mm² vehicle cable (3 m run), matched TVS iQube charge port plug.
  • Required Build & Safety Tools (4 items): Digital multimeter (to test panel Voc & meter your OEM charger), wire cutters/strippers, insulated gloves, and clear safety glasses.
  • Optional Extras (Never Required — unticked by default): 3D-printable MPPT strain-relief & button-locking shell, 45° PV cable bend guides, and an optional inline DC fuse (belt-and-braces protection for long runs — not required because the MPPT controller already limits its own output current and the scooter has a main battery fuse).
Product 2 · 16-Step Guide + AI Assistant$19.99 · Includes $5 AI Credit

Solar Kit Assembly Instructions + AI Build Assistant

Our interactive step-by-step build guide generated specifically for your TVS iQube 3.5 kWh configuration — taking you from unpacking boxes to a verified solar charge in strict dead-wires-first order:

  • Tailored to your exact kit parts: Custom schematic diagrams and exact strip/cut lengths for your 4 mm² (5 m) panel run, 4 mm² (3 m) vehicle run, and TVS iQube charge port connector.
  • Strict dead-wires-first electrical order: Every screw terminal and wire splice is completed while panels are covered/unplugged and the scooter is disconnected — you never handle a live conductor.
  • Includes US$5 of AI Build Assistant credit: Snap a photo of your multimeter reading, MPPT terminal wiring, or solder-seal splice at any step for instant verification before plugging in (plus read-aloud audio on every step).

The 4 Build Phases: How Your TVS iQube 3.5 kWh Solar Kit Goes Together

Because the charge socket on your TVS iQube 3.5 kWh is a live battery terminal, our 16-step assembly guide sequences the build into four distinct phases so you never guess polarity or work on live wires:

Phase 1 · Steps 1–4

Check your BOM, test panel Voc (~22 V) in sun & dry-fit the layout

Verify all required parts and safety tools against your Bill of Materials (BOM). Before mounting anything (while still inside the seller's return window), place each panel in full sun and measure open-circuit voltage (~22 V DC per panel) with your multimeter. Position the panels in unshaded sun and the boost MPPT in dry ventilated shade, then dry-fit both cable runs before cutting wire.

Phase 2 · Steps 5–10

Wire the array & land both MPPT terminal blocks while completely dead

Join the 3 panels (3S) and check ~66 V string Voc with your meter, then leave the panel MC4 leads unclipped (or keep panels covered). Route the 4 mm² panel cable and 4 mm² vehicle cable, and screw both into the MPPT's PV+/PV− and BAT+/BAT− terminals in one sitting while zero voltage is present.

Phase 3 · Step 11

Meter your isolated OEM charger plug & bench-splice the TVS iQube charge port lead

Never plug bare pigtail wires into the scooter or probe the live vehicle socket blind. Plug your factory AC wall charger into the wall and probe its isolated DC output plug with your multimeter to identify positive (+) and negative (−). At the bench with everything disconnected, slide on the yellow 4.0–6.0 mm² solder-seal tube first, heat-splice the two power conductors, tug-test, insulate unused signal pins separately, and meter for zero continuity between + and −. (An inline DC fuse is optional belt-and-braces protection for long runs, not a requirement, since the MPPT limits its own output and the scooter has a main fuse.)

Phase 4 · Steps 12–16

Boot the MPPT on solar, set your verified CV & current limits, plug in & verify on the dash

Clip the solar array MC4 connectors together first (with the scooter still unplugged) so the MPPT display boots on solar power. Read the DC OUTPUT rating on your own OEM charger nameplate (confirmed by your multimeter) and set the MPPT's constant-voltage (CV) ceiling at or slightly below that figure — never above — along with the current limit. Plug into the TVS iQube 3.5 kWh, watch watts climb on the controller, and verify after 10 minutes that your scooter's dashboard battery % has risen.

Inside the Solar Kit Assembly Instructions Product (16 Tailored Steps)

All 16 Steps Generated for Your TVS iQube 3.5 kWh Kit

Read Step 1 Free & Preview Guide →
  1. 1Gather required parts & tools against your Bill of Materials (BOM)Free Sample
  2. 2Test each panel's open-circuit voltage (~22 V Voc) in full sun before mounting
  3. 3Plan the layout (panels in full sun, boost MPPT in dry shade, dry-fit cable runs)
  4. 4Mount or place the 3 panels with a 0.5 m seasonal service loop
  5. 5Wire the 3 panels in 3S & verify ~66 V string Voc with your multimeter
  6. 6Run the 5 m (4 mm²) panel cable to the controller (leave array unplugged)
  7. 7Strip 6–7 mm & crimp MC4 connectors onto the panel-side cable ends
  8. 8Wire the panel cable into the MPPT PV+ and PV− screw terminals while dead
  9. 9Run the 3 m (4 mm²) vehicle DC cable from the MPPT to your parking spot
  10. 10Wire the vehicle cable into the MPPT BAT+ and BAT− terminals in the same dead sitting
  11. 11Meter polarity on your isolated OEM charger plug & assemble the TVS iQube charge port adapter at the bench
  12. 12Clip the solar array MC4 leads together to wake the MPPT display (~66 V PV in, scooter still unplugged)
  13. 13Read DC OUTPUT on your OEM charger nameplate, verify with your meter & set the MPPT CV ceiling
  14. 14Set the MPPT charge current limit at or below your OEM rating (this array supplies ~5.1 A)
  15. 15Plug the verified TVS iQube charge port connector into the TVS iQube 3.5 kWh & watch the MPPT settle into charging
  16. 16Confirm climbing watts on the MPPT & verify the scooter's dashboard battery % rises after 10 minutes

Step 1 is fully unlocked as a free sample (including the read-aloud player & Ask AI composer). Unlock all 16 steps with custom wiring diagrams and US$5 of AI Build Assistant credit for a one-time US$19.99 (no subscription).

Recorded TVS iQube 3.5 kWh Charger Specs & Connector Family

The table below lists the battery architecture, recorded OEM wall charger specifications with their confidence level and source, and our connector verification status. We never recommend an MPPT voltage setpoint: always read the DC OUTPUT rating on your own OEM charger nameplate and verify it with a multimeter.

Nominal Voltage51.7 V DC
Pack Capacity3,500 Wh (67.7 Ah)
Battery ChemistryLi-ion (Fixed on-board pack)
Recorded OEM Charger Rating58.8 V DC max (950 W) Medium
Connector FamilyTVS iQube charge port Low (inferred)
Pin Count & Gender on VehicleUnmeasured · unknown (on vehicle)
Adapter Verification StatusIdentified · Family confirmed

Solar Kit Assembly Instructions + AI Build Assistant

Follow interactive wiring diagrams for your exact cable gauge and connector family, with an AI build assistant ready to verify photos at every step.

Open Assembly Guide →

5 · TVS iQube 3.5 kWh Solar Charging FAQ & Distance Sizing

TVS iQube 3.5 kWh Solar Charging FAQ

How many watts of solar do I need to charge a TVS iQube 3.5 kWh?

For a 35 km/day (21.7 mi/day) commute (~844 Wh/day), the TVS iQube 3.5 kWh needs a 300 W solar array (3 × 100 W wired in series) feeding a DC boost MPPT controller. At 5.4 peak sun hours/day, 300 W recovers a 35 km ride in about 4.2 sun hours. For a 40 km/day (24.9 mi/day) commute (~964 Wh/day), step up to a 300 W array.

How do I verify the OEM charger voltage and pin polarity on the TVS iQube 3.5 kWh?

Our dataset records the TVS iQube 3.5 kWh OEM charger ceiling at 58.8 V DC (confidence: medium), but you should never copy a voltage figure blindly from the web. Read the "DC OUTPUT" rating printed on your own original OEM AC wall charger nameplate, then plug the OEM brick in and probe its isolated DC output plug with a digital multimeter to verify both the constant-voltage ceiling and which pin is positive (+) and negative (−) before wiring your TVS iQube charge port lead (port status: identified).

Can I charge the TVS iQube 3.5 kWh from solar while riding?

No. Direct DC solar kits are designed for stationary daytime charging while parked at home or work, with the panels in full sun and the boost MPPT resting in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge port is active.

Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)

Computed from a consumption rate of 24.1 Wh/km, a 3,500 Wh pack, 5.4 peak sun hours/day in India, a 0.70 real-world panel derating factor, and boost MPPT + DC cable efficiency.

Daily DistanceDaily WhRecommended ArrayWiring & VmpSun Hrs to Recover0–100% Full Pack
10 km/day241 Wh100 W (1 panel)1S · 18 V Vmp3.7 hrs13.4 sunny days
20 km/day482 Wh200 W (2 panels)2S · 36 V Vmp3.6 hrs6.8 sunny days
30 km/day723 Wh200 W (2 panels)2S · 36 V Vmp5.4 hrs4.8 sunny days
35 km/day844 Wh300 W (3 panels)3S · 54 V Vmp4.2 hrs4.1 sunny days
40 km/day964 Wh300 W (3 panels)3S · 54 V Vmp4.8 hrs3.5 sunny days