Bosch PowerTube 750

Electric bike · 2025

Battery
36 V · 20.8 Ah750 Wh · NMC
Motor
250 W
Top speed
25 km/h
Range
110 km
Consumption
6.8 Wh/kmestimated

Can You Solar Charge a Bosch PowerTube 750?

Yes, You Can!Solar via a Power Station

No DC port · Charges through its own 170 W charger · 250 W station

A 150 W solar array charges a power station, and the station's AC outlet feeds the Bosch PowerTube 750's own charger (170 W at 230 V) through its Bosch eBike charging socket inlet. A 33 km day (~224 Wh) is recovered in about 3 sun hours (4.5 sun hours/day market average). There is no separate MPPT and no charge voltage for us to recommend — the vehicle's charger owns the battery.

150 W Solar Array

single panel

250 W Station AC

for a 170 W charger at 230 V

~3 hrs sun for 33 km

Daily 33 km commute recovery

This market's catalogue has no priced station kit yet

Similar vehicles & kit parts

Riders also viewed

2 · Kit Cost, Payoff Period & What the Station Must Do

Should You Solar Charge Your Bosch PowerTube 750?

Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership, air and noise pollution, and local legal rules in European Union — so you can decide for yourself.

How much does a station kit for a Bosch PowerTube 750 cost?

Not priced in this market yetNo station in this market's catalogue

A complete station kit for the Bosch PowerTube 750 cannot be priced in this market yet, because our catalogue has no station that meets the requirement — this is not an MPPT kit: the station supplies a mains socket and the vehicle's own charger does the rest.

View Parts List →Per-item pricing, safety disclaimers and retailer links

Will You Save Money over Gas?

No station in this market's catalogue yet250 W AC out · 250 Wh

The requirement is calculated — a station with at least 250 W of AC output, 250 Wh of capacity, and a bond route its maker supports. Our catalogue has no unit that meets it in this market yet, so we do not offer a smaller stand-in: a station below that figure is not a slower option, it is not an option.

What the station has to be able to do

Charger load

The station's AC output must be 1.25× the charger's draw

Its own charger (170 W at 230 V)170 W
Smallest station AC output250 W

A charger is a switch-mode load: it pulls a surge at start-up, so a station sized exactly to the wattage will trip even though the numbers look right. Beyond AC output, the station must bank 250 Wh for a day's riding and its solar input must accept the 150 W array — that input is usually the number that actually binds.

A floating neutral is why a station refuses a vehicle

The vehicle's charging cable checks for a neutral-to-ground path before it closes its relay. A station whose output floats reads as a ground fault, and the charge never starts even though the station is running. Only two fixes are legitimate: a unit bonded at the factory, or the station maker's own grounding adapter — model-specific, never universal.

No station in this market meets the requirement yet

The requirement: 250 W of AC output, 250 Wh of capacity, and a solar input for the 150 W array.

Will Solar-Charging a Bosch PowerTube 750 Reduce Air Pollution (CO₂ & PM2.5)?

Yes — 0 g Tailpipe, −98% CO₂ & −88% Fine PM2.5 Particles

In Your Country, the utility power grid averages 475 g CO₂/kWh (35% coal/fossil share). Charging your Bosch PowerTube 750 directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:

Carbon Emissions per Kilometer (g CO₂/km)

51 g/km
125cc Gas ScooterPetrol exhaust
4 g/km
PowerTube 750 (Wall Grid)475 g CO₂/kWh (Your Country)
1 g/km
PowerTube 750 (Solar Kit)−98% vs. gas

Breathable PM2.5 Air Particles (mg PM2.5/km)

28 mg/km
125cc Gas ScooterExhaust soot + brake wear
4.2 mg/km
PowerTube 750 (Wall Grid)Coal plant + tire wear
3.5 mg/km
PowerTube 750 (Solar Kit)0 exhaust soot (−88%)

Sources: IEA / Ember Global Average Grid Carbon Intensity (~475 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.

Will Driving a Solar-Charged Bosch PowerTube 750 Reduce Noise Pollution?

Yes — ~80% Quieter to the Human Ear (53 dBA vs. 76 dBA)

Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The Bosch PowerTube 750's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:

84 dBA
125cc Gas (Accelerating)Loud urban traffic
76 dBA
125cc Gas (30 km/h Cruise)~5× louder than EV
53 dBA
PowerTube 750 (30 km/h Cruise)Quiet conversation level
0 dBA
Solar Kit ChargingNo engine noise — only the station's inverter fan

Is It Legal to Solar-Charge a Bosch PowerTube 750 in Your Country?

Yes — No Permit for the Panel or the StationStandalone appliance · no utility interconnection

Relevant authority: local utility interconnection rules & your vehicle's road registration

Utility interconnection agreements and roof-solar permits apply to AC photovoltaic systems wired into a home's breaker panel. A portable power station charged by ground- or balcony-mounted panels is a standalone appliance: it never exports to the grid, so there is nothing to interconnect. Two questions stay separate — whether the panel and station need approval (they do not), and whether the vehicle may be ridden on public roads, which is that vehicle's own registration question and is not changed by charging it from the sun.

  • No utility interconnection: the station is charged from panels and never exports power.
  • No roof work: ground, balcony or carport placement avoids the roof work that usually triggers a permit.
  • Road legality belongs to the vehicle: solar charging changes neither its registration, its insurance, nor where it may be ridden.

Ride more or less than 33 km/day? Adjust your daily distance, panel placement and cable runs for the Bosch PowerTube 750:

Size Your PowerTube 750 Station Kit →

2a · Head-to-head

How does it compare to popular EVs?

Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (33 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.

Price

new vehicle price
Bosch PowerTube 750This model
—
NCM Moscow Plus
$1,699
Ducati MIG-S
—
Ducati Powerstage RR
—
Ducati TK-01RR
—

Top Speed

Bosch PowerTube 750This model
25 km/h
NCM Moscow Plus
32 km/h
Ducati MIG-S
25 km/h
Ducati Powerstage RR
25 km/h
Ducati TK-01RR
25 km/h

Range

Bosch PowerTube 750This model
110 km
NCM Moscow Plus
80 km
Ducati MIG-S
—
Ducati Powerstage RR
—
Ducati TK-01RR
—

Battery Size

Bosch PowerTube 750This model
0.8 kWh
NCM Moscow Plus
0.8 kWh
Ducati MIG-S
0.6 kWh
Ducati Powerstage RR
0.6 kWh
Ducati TK-01RR
0.6 kWh

Motor Wattage

Bosch PowerTube 750This model
250 W
NCM Moscow Plus
500 W
Ducati MIG-S
250 W
Ducati Powerstage RR
250 W
Ducati TK-01RR
250 W

Solar Chargeable

— = no plug on record yet
DC charging
AC charging
Bosch PowerTube 750This model
DC charging: No
AC charging: Yes
NCM Moscow Plus
DC charging: No
AC charging: Yes
Ducati MIG-S
DC charging: No
AC charging: Yes
Ducati Powerstage RR
DC charging: No
AC charging: Yes
Ducati TK-01RR
DC charging: No
AC charging: Yes

Cost per km (5 years)

incl. vehicle + kit + upkeep
Bosch PowerTube 750This model
—
NCM Moscow Plus
$0.03/km
Ducati MIG-S
—
Ducati Powerstage RR
—
Ducati TK-01RR
—

Cost per km (10 years)

incl. vehicle + kit + upkeep
Bosch PowerTube 750This model
—
NCM Moscow Plus
$0.02/km
Ducati MIG-S
—
Ducati Powerstage RR
—
Ducati TK-01RR
—

Compare them side by side, attribute by attribute →

3 · Station Kit Parts for Bosch PowerTube 750

What do you need to solar charge a Bosch PowerTube 750?

Click any part below to open the full parts list with safety disclaimers & live retailer links, or adjust your daily distance and cable runs in the free kit configurator. There is no MPPT controller in this list: a station's solar input is already an MPPT, and a second controller cannot be wired into it.

Estimated core kit total: not priced yet

See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.

Phase 1

Solar array → the station's solar input

The 150 W array (1 panel) feeds the station's solar input, not the vehicle. That input is already an MPPT with its own Voc window — it is the only voltage ceiling on this path.

Phase 2

The station banks the day's energy

The station holds 250 Wh — about one day's riding. The pattern is accumulate-then-dump: the array fills the station through the day and the vehicle takes it in one or two sessions.

Phase 3

The station's AC outlet → the vehicle's own charger

The vehicle's own 170 W charger plugs into the station's AC output. That charger owns the voltage and current the pack sees, so there is no setting for you to enter.

Phase 4

The AC output's neutral must be bonded

The charging cable checks for a neutral-to-ground path before closing its relay. A floating station is rejected as a ground fault, so a factory-bonded unit or its maker's grounding adapter is a purchase requirement, not an extra.

4 · Safe Charging Order & Recorded Charger Specs

How to Charge a Bosch PowerTube 750 With Free Solar Power

To charge a Bosch PowerTube 750 from sunlight, the 150 W array charges a power station, and the station feeds the vehicle's own charger through its Bosch eBike charging socket inlet. The order matters: array first, station second, vehicle last — so the AC outlet is never live before its neutral is bonded.

1 · Measure the array's Voc in sun & land it on the station's solar input

Wire the 1 panel to the configuration the plan computed (1S) and check the string's open-circuit voltage with your meter. Never exceed the station's solar-input Voc limit — its input is usually not MC4, so an adapter cable may be needed.

2 · Power the station and confirm its AC output is pure sine

Power the station from solar and confirm no fault code. The output must be pure sine: a modified-sine inverter will make the charger buzz or trip. Check too that the outlet can deliver at least 250 W.

3 · Bond the outlet's neutral before the vehicle is plugged in

Fit the station maker's grounding adapter first (they are model-specific), then plug the vehicle's cable into the AC outlet. Without this step the cable reads a ground fault and never closes its relay.

4 · Plug in the vehicle's own cable and watch the dash

Use the Bosch PowerTube 750's own charging cable. The vehicle's charger starts the session, so the numbers to watch are on the dash and on the station's output load. After ten minutes the battery percentage must be rising.

Recorded Bosch PowerTube 750 Charger & Inlet Specs

The table lists the battery architecture, the built-in charger's draw at this market's mains, and the inlet's verification status. We never recommend a charge voltage — the vehicle's own charger decides it.

Nominal Voltage36 V
Pack Capacity750 Wh (20.8 Ah)
Battery ChemistryNMC (removable)
Built-in Charger at 230 V170 W
Vehicle InletBosch eBike charging socket
Station Class250 W minimum AC output · 250 Wh capacity · 150 W solar input
Neutral BondNo station in this market's catalogue

Recorded Data Sources

5 · Bosch PowerTube 750 Solar Charging FAQ & Distance Sizing

Bosch PowerTube 750 Solar Charging FAQ

Can you solar charge a Bosch PowerTube 750?

Yes — but not through a DC kit. The Bosch PowerTube 750 has no DC charge port: its inlet is Bosch eBike charging socket and its charger is built into the vehicle (170 W at 230 V). The solar route is a power station into that charger: a 150 W array charges the station, the station's AC outlet feeds the vehicle's own cable, and a 33 km day (~224 Wh) is recovered in about 3 sun hours.

How big a power station does the Bosch PowerTube 750 need?

Two numbers, and the larger one decides. Its AC output must carry the charger with 25% headroom — at least 250 W for a 170 W charger at 230 V. Its battery must bank a day's riding, so 250 Wh. The station's solar input is usually the third limit: an array larger than that input is array the station cannot absorb.

Why can't an MPPT kit charge the PowerTube 750?

An MPPT kit feeds a two-wire DC port at pack voltage. The Bosch PowerTube 750 runs a 36 V pack (750 Wh), above the 75 V DC line, and it has no DC port to feed at all — its inlet is AC and the charger that talks to the battery is inside the vehicle. A kit would have nothing to plug into.

Why does my power station refuse to charge this scooter?

Because its AC output floats. The vehicle's charging cable reads the missing neutral-to-ground path as a ground fault and drops its relay, so the vehicle does not charge even though the station is running. The fix is the station maker's grounding adapter — model-specific, never universal — or a unit whose output is bonded from the factory. This is what makes most power stations refuse a vehicle.

Can I use the PowerTube 750's own charging cable from a power station?

Yes, as long as the station meets the numbers above. One constraint: a Bosch eBike charging socket cable cannot advertise less than 6 A, so the smallest load it can present is 0 W at 230 V — the station has to sustain that continuously, not just at start-up. Pure sine only; a modified-sine inverter will buzz or trip on this load.

How many panels to charge the whole pack in a day?

A full 750 Wh in one sunny day needs about 350 W of array — a far bigger number than the 150 W a 33 km/day commute needs. For daily riding the pattern is accumulate-then-dump: the array banks the day's energy in the station and the vehicle takes it in one or two sessions.

Can I charge while riding?

No. The system is designed for stationary daytime charging, with the panels in full sun and the station in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge inlet is active.

Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)

Computed from a consumption rate of 6.8 Wh/km, the AC path's conversion chain (station PV input × inverter × the vehicle's charger ≈ 70%), a 0.70 panel derating factor, and 4.5 peak sun hours/day in European Union. The last column is the sun hours the array needs to put the day's energy back — when it exceeds the market's sun hours, this station does not close the day.

Daily DistanceDaily WhArray (needed → bought)Sun Hrs to Recover0–100% Full Pack
10 km/day68 Wh50 W → 50 W (1 panel, 1S)2.8 hrs6.8 sunny days
20 km/day136 Wh100 W → 100 W (1 panel, 1S)2.8 hrs3.4 sunny days
30 km/day204 Wh100 W → 100 W (1 panel, 1S)4.1 hrs3.4 sunny days
33 km/day224 Wh150 W → 150 W (1 panel, 1S)3 hrs2.3 sunny days
40 km/day272 Wh150 W → 150 W (1 panel, 1S)3.7 hrs2.3 sunny days