Lectric XP4

Electric bike · 2025

Battery
48 V · 10.4 Ah499 Wh · NMC
Motor
500 W
Top speed
45 km/h
Range
80 km
Consumption
6.2 Wh/kmestimated
$999official store · Nov 2026Buy at Lectric

Can You Solar Charge a Lectric XP4?

Yes, You Can!Direct DC Solar Compatible

No AC inverter needed · No $500 power station · Plugs into the Junlei 3015 3-pin port

A 140 W solar array (1 × 140 W) feeding a DC boost MPPT controller recovers a 51 km/day commute on the Lectric XP4 in about 3.4 peak sun hours (4.5 sun hours/day market average). The XP4 uses a 48 V 499 Wh NMC pack (recorded OEM charger ceiling: 54.6 V DC, confidence: High, source — always read your own charger nameplate & verify with a multimeter) and charges through its Junlei 3015 3-pin port.

Lectric XP4 — 140 W solar charging kit

140 W Solar Array

1 × 140 W (1S)

~3.4 hrs sun for 51 km

Daily 51 km commute recovery

~1.1 yr payoff vs. gas

Saves ~$359/yr

Complete kit total: $390 · sized for a 51 km/day commute

Similar vehicles & kit parts

Riders also viewed

2 · Kit Cost, Payoff Period & Direct DC Efficiency

Should You Solar Charge Your Lectric XP4?

Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership versus a new gas scooter, air and noise pollution, and local legal rules in United States — so you can decide for yourself.

How much does a solar kit for a Lectric XP4 cost?

$390 Complete 140 W Kit1 × 140 W Panels + Boost MPPT + Cables & Plug

A complete direct-DC solar charging kit for the Lectric XP4 costs $390 (including 1 × 140 W monocrystalline panels, a DC boost MPPT controller, sized solar cables, and the matched Junlei 3015 3-pin plug) — roughly one-third the cost of a portable power station setup.

View Parts List →Itemized 1 × 140 W panels, MPPT, cables & Junlei 3015 3-pin plug

Will You Save Money over Gas?

Yes — ~1.1 Yr Payoff vs. Gas

10-Year Cumulative Fuel Savings — Lectric XP4

vs. buying gas (~$359/yr)vs. wall-outlet electricity (~$24/yr)
$0$1,078$2,155$3,233$4,310Yr 0Yr 1Yr 2Yr 3Yr 4Yr 5Yr 6Yr 7Yr 8Yr 9Yr 10Kit Cost: $390Payoff vs. Gas: ~1.1 yrsvs. Wall (~15.9 yr payoff)

~1.1 yrs

Payoff breakeven vs. buying gas (~$359/yr)

~15.9 yrs

Payoff breakeven vs. wall outlet (~$24/yr)

+$3,920

Net profit vs. gas by Year 10 ($294 in grid kWh avoided)

⚡ Head-to-Head Ownership Cost

Is a solar-charged Lectric XP4 really cheaper than petrol?

☀️ Solar-Charged EV🏆 Cheapest
Lectric XP4

Lectric XP4 + Solar

500 W · 0.5 kWh NMC · 45 km/h · 80 km range

$1,539/5 yrs

Vehicle Price$999
Solar Kit + 0 Fuel$390
Service & Tax (5 yrs)$150
VS
⛽ Gas Scooter (Petrol)
Honda Ruckus 49cc (Gas)

Honda Ruckus 49cc (Gas)

49cc · 47.6 km/L · 64 km/h

$2,527/5 yrs

Vehicle Purchase Price$0
5-Yr Petrol (+4%/yr)$2,527
Oil, CVT & Tax (5 yrs)$0
Saves $988 over 5 years
51 km/day · incl. purchase price
Energy Cost / 100 km
$0 (Solar)vs.$3
Top Speed
45 km/hvs.64 km/h
Annual Maintenance
$18vs.$0

Why direct DC boost beats a portable power station

Solar Efficiency

Share of panel wattage that reaches the battery

Direct DC Boost (Panel → MPPT → Bike)95%
Portable Power Station (DC → AC → DC)72%

Charges the Lectric XP4's own 499 Wh pack directly without wasting 25–28% of your solar wattage in a DC→AC→DC inverter loop.

Zero home breaker stress (off-grid ready)

Solar Daytime Charging0 W grid draw
Factory AC Charger (on 900 VA breaker)450 W (50%)

Draws 0 W from your home breaker vs. 450 W from the factory AC brick — preventing breaker trips and charging in unpowered sheds or carports.

Will Solar-Charging a Lectric XP4 Reduce Air Pollution (CO₂ & PM2.5)?

Yes — 0 g Tailpipe, −98% CO₂ & −88% Fine PM2.5 Particles

In United States, the utility power grid averages 380 g CO₂/kWh (16% coal/fossil share). Charging your Lectric XP4 directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:

Carbon Emissions per Kilometer (g CO₂/km)

51 g/km
125cc Gas ScooterPetrol exhaust
3 g/km
XP4 (Wall Grid)380 g CO₂/kWh (United States)
1 g/km
XP4 (Solar Kit)−98% vs. gas

Breathable PM2.5 Air Particles (mg PM2.5/km)

28 mg/km
125cc Gas ScooterExhaust soot + brake wear
3.7 mg/km
XP4 (Wall Grid)Coal plant + tire wear
3.5 mg/km
XP4 (Solar Kit)0 exhaust soot (−88%)

Sources: US EPA eGRID National Average (~380 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.

Will Driving a Solar-Charged Lectric XP4 Reduce Noise Pollution?

Yes — ~80% Quieter to the Human Ear (53 dBA vs. 76 dBA)

Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The Lectric XP4's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:

84 dBA
125cc Gas (Accelerating)Loud urban traffic
76 dBA
125cc Gas (30 km/h Cruise)~5× louder than EV
53 dBA
XP4 (30 km/h Cruise)Quiet conversation level
0 dBA
Solar Kit ChargingNo engine noise — unplug the MPPT fan

Is It Legal to Solar-Charge a Lectric XP4 in United States?

Yes — 100% Legal with No Utility Interconnection Permit in the USNEC Article 690 / Utility Interconnection (standalone low-voltage DC exemption)

Relevant authority: Local AHJ / Utility Interconnection & NEC Article 690

Utility interconnection agreements and municipal roof-solar permits apply to grid-interactive AC photovoltaic systems wired into a home's breaker panel. A portable or ground/shed-placed low-voltage DC solar charger (< 60 V DC, 100-400 W) that plugs straight into an e-bike or scooter battery is a standalone DC appliance and requires no utility approval.

  • Zero Utility Interconnection: Never touches 120V/240V household AC wiring.
  • Low-Voltage DC (< 60 V): Below NEC high-voltage thresholds with no AC inverter.
  • HOA & Renter Friendly: Ground, balcony, or shed placement requires no roof penetration.

Ride more or less than 51 km/day? Adjust your daily distance, panel mounting, and cable runs for the Lectric XP4:

Size Your XP4 Kit →

2a · Head-to-head

How does it compare to popular EVs?

Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (51 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.

Price

new vehicle price
Lectric XP4This model
$999
Bosch PowerTube 500
$1,000
Heybike Mars 3.0
$1,099
Ride1Up Portola 02
$995
Lectric XP Lite 3
$799

Top Speed

Lectric XP4This model
45 km/h
Bosch PowerTube 500
25 km/h
Heybike Mars 3.0
—
Ride1Up Portola 02
45 km/h
Lectric XP Lite 3
32 km/h

Range

Lectric XP4This model
80 km
Bosch PowerTube 500
80 km
Heybike Mars 3.0
105 km
Ride1Up Portola 02
96 km
Lectric XP Lite 3
72 km

Battery Size

Lectric XP4This model
0.5 kWh
Bosch PowerTube 500
0.5 kWh
Heybike Mars 3.0
0.6 kWh
Ride1Up Portola 02
0.7 kWh
Lectric XP Lite 3
0.4 kWh

Motor Wattage

Lectric XP4This model
500 W
Bosch PowerTube 500
250 W
Heybike Mars 3.0
750 W
Ride1Up Portola 02
750 W
Lectric XP Lite 3
300 W

Solar Chargeable

— = no plug on record yet
DC charging
AC charging
Lectric XP4This model
DC charging: Yes
AC charging: Yes
Bosch PowerTube 500
DC charging: No
AC charging: Yes
Heybike Mars 3.0
DC charging: Yes
AC charging: Yes
Ride1Up Portola 02
DC charging: Yes
AC charging: Yes
Lectric XP Lite 3
DC charging: Yes
AC charging: Yes

Cost per km (5 years)

incl. vehicle + kit + upkeep
Lectric XP4This model
$0.02/km
Bosch PowerTube 500
$0.02/km
Heybike Mars 3.0
$0.02/km
Ride1Up Portola 02
$0.02/km
Lectric XP Lite 3
$0.01/km

Cost per km (10 years)

incl. vehicle + kit + upkeep
Lectric XP4This model
$0.009/km
Bosch PowerTube 500
$0.008/km
Heybike Mars 3.0
$0.009/km
Ride1Up Portola 02
$0.008/km
Lectric XP Lite 3
$0.007/km

Compare them side by side, attribute by attribute →

3 · Solar Kit Parts for Lectric XP4

What do you need to solar charge a Lectric XP4?

Click any part below to open the full parts list with safety disclaimers & live retailer links, or customize your daily distance and cable lengths in the free kit configurator:

Estimated core kit total: $390

See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.

Watch: 3D Solar Kit Assembly & Safe Wiring Sequence in Action

Placing the panel in full sun, landing PV and battery leads into the dead MPPT terminals first, verifying CV target voltage on the lit LCD, and closing the strain-relief armor.

4 · Complete BOM, 14-Step Assembly Guide & Safe Verification

How to Charge a Lectric XP4 With Free Solar Power

To charge a Lectric XP4 directly from sunlight without an AC inverter or portable power station, a 140 W solar array (1 × 140 W) feeds a DC-DC boost MPPT controller that steps the array's 19.5 V Vmp up to your 48 V pack through its Junlei 3015 3-pin port. We built two products specifically for the Lectric XP4 so you never have to guess a part, wire gauge, or assembly step:

Product 1 · Free Bill of Materials (BOM)Free Access

Your Lectric XP4 Parts List (BOM)

Itemizes every required component and safety tool for your XP4 kit (estimated core total $390) with direct retailer links — cleanly separated from optional extras so you never overbuy:

  • Required Core Hardware (5 items): 1 × 140 W solar panels, DC boost MPPT controller, 5.26 mm² panel cable (5 m run), 5.26 mm² vehicle cable (3 m run), matched Junlei 3015 3-pin plug.
  • Required Build & Safety Tools (4 items): Digital multimeter (to test panel Voc & meter your OEM charger), wire cutters/strippers, insulated gloves, and clear safety glasses.
  • Optional Extras (Never Required — unticked by default): 3D-printable MPPT strain-relief & button-locking shell, 45° PV cable bend guides, and an optional inline DC fuse (belt-and-braces protection for long runs — not required because the MPPT controller already limits its own output current and the scooter has a main battery fuse).
Product 2 · 14-Step Guide + AI Assistant$19.99 · Includes $5 AI Credit

Solar Kit Assembly Instructions + AI Build Assistant

Our interactive step-by-step build guide generated specifically for your Lectric XP4 configuration — taking you from unpacking boxes to a verified solar charge in strict dead-wires-first order:

  • Tailored to your exact kit parts: Custom schematic diagrams and exact strip/cut lengths for your 5.26 mm² (5 m) panel run, 5.26 mm² (3 m) vehicle run, and Junlei 3015 3-pin connector.
  • Strict dead-wires-first electrical order: Every screw terminal and wire splice is completed while panels are covered/unplugged and the scooter is disconnected — you never handle a live conductor.
  • Includes US$5 of AI Build Assistant credit: Snap a photo of your multimeter reading, MPPT terminal wiring, or solder-seal splice at any step for instant verification before plugging in (plus read-aloud audio on every step).

The 4 Build Phases: How Your Lectric XP4 Solar Kit Goes Together

Because the charge socket on your Lectric XP4 is a live battery terminal, our 14-step assembly guide sequences the build into four distinct phases so you never guess polarity or work on live wires:

Phase 1 · Steps 1–4

Check your BOM, test panel Voc (~23.5 V) in sun & dry-fit the layout

Verify all required parts and safety tools against your Bill of Materials (BOM). Before mounting anything (while still inside the seller's return window), place each panel in full sun and measure open-circuit voltage (~23.5 V DC per panel) with your multimeter. Position the panels in unshaded sun and the boost MPPT in dry ventilated shade, then dry-fit both cable runs before cutting wire.

Phase 2 · Steps 5–8

Wire the array & land both MPPT terminal blocks while completely dead

Join the 1 panels (1S) and check ~23.5 V string Voc with your meter, then leave the panel MC4 leads unclipped (or keep panels covered). Route the 5.26 mm² panel cable and 5.26 mm² vehicle cable, and screw both into the MPPT's PV+/PV− and BAT+/BAT− terminals in one sitting while zero voltage is present.

Phase 3 · Step 9

Meter your isolated OEM charger plug & bench-splice the Junlei 3015 3-pin lead

Never plug bare pigtail wires into the scooter or probe the live vehicle socket blind. Plug your factory AC wall charger into the wall and probe its isolated DC output plug with your multimeter to identify positive (+) and negative (−). At the bench with everything disconnected, slide on the yellow 4.0–6.0 mm² solder-seal tube first, heat-splice the two power conductors, tug-test, insulate unused signal pins separately, and meter for zero continuity between + and −. (An inline DC fuse is optional belt-and-braces protection for long runs, not a requirement, since the MPPT limits its own output and the scooter has a main fuse.)

Phase 4 · Steps 10–14

Boot the MPPT on solar, set your verified CV & current limits, plug in & verify on the dash

Clip the solar array MC4 connectors together first (with the scooter still unplugged) so the MPPT display boots on solar power. Read the DC OUTPUT rating on your own OEM charger nameplate (confirmed by your multimeter) and set the MPPT's constant-voltage (CV) ceiling at or slightly below that figure — never above — along with the current limit. Plug into the Lectric XP4, watch watts climb on the controller, and verify after 10 minutes that your scooter's dashboard battery % has risen.

Inside the Solar Kit Assembly Instructions Product (14 Tailored Steps)

All 14 Steps Generated for Your Lectric XP4 Kit

Read Step 1 Free & Preview Guide →
  1. 1Gather required parts & tools against your Bill of Materials (BOM)Free Sample
  2. 2Test the panel's open-circuit voltage (~23.5 V Voc) in full sun before mounting
  3. 3Plan the layout (panels in full sun, boost MPPT in dry shade, dry-fit cable runs)
  4. 4Mount or place the panel with a 0.5 m seasonal service loop
  5. 5Run the 5 m (5.26 mm²) panel cable to the controller (leave array unplugged)
  6. 6Wire the panel cable into the MPPT PV+ and PV− screw terminals while dead
  7. 7Run the 3 m (5.26 mm²) vehicle DC cable from the MPPT to your parking spot
  8. 8Wire the vehicle cable into the MPPT BAT+ and BAT− terminals in the same dead sitting
  9. 9Meter polarity on your isolated OEM charger plug, solder-seal splice the Junlei 3015 3-pin lead at the bench & insulate unused pins
  10. 10Clip the solar array MC4 leads together to wake the MPPT display (~23.5 V PV in, scooter still unplugged)
  11. 11Read DC OUTPUT on your OEM charger nameplate, verify with your meter & set the MPPT CV ceiling
  12. 12Set the MPPT charge current limit at or below your OEM rating (this array supplies ~2.6 A)
  13. 13Plug the verified Junlei 3015 3-pin connector into the Lectric XP4 & watch the MPPT settle into charging
  14. 14Confirm climbing watts on the MPPT & verify the scooter's dashboard battery % rises after 10 minutes

Step 1 is fully unlocked as a free sample (including the read-aloud player & Ask AI composer). Unlock all 14 steps with custom wiring diagrams and US$5 of AI Build Assistant credit for a one-time US$19.99 (no subscription).

Recorded Lectric XP4 Charger Specs & Connector Family

The table below lists the battery architecture, recorded OEM wall charger specifications with their confidence level and source, and our connector verification status. We never recommend an MPPT voltage setpoint: always read the DC OUTPUT rating on your own OEM charger nameplate and verify it with a multimeter.

Nominal Voltage48 V DC
Pack Capacity499 Wh (10.4 Ah)
Battery ChemistryNMC (Removable pack)
Recorded OEM Charger Rating54.6 V DC max · 2 A (109 W) High
Connector FamilyJunlei 3015 3-pin High
Pin Count & Gender on Vehicle3-pin · female (on vehicle)
Adapter Verification StatusSourced · Plug available

Solar Kit Assembly Instructions + AI Build Assistant

Follow interactive wiring diagrams for your exact cable gauge and connector family, with an AI build assistant ready to verify photos at every step.

Open Assembly Guide →

5 · Lectric XP4 Solar Charging FAQ & Distance Sizing

Lectric XP4 Solar Charging FAQ

How many watts of solar do I need to charge a Lectric XP4?

For a 51 km/day (31.7 mi/day) commute (~316 Wh/day), the Lectric XP4 needs a 140 W solar array (1 × 140 W) feeding a DC boost MPPT controller. At 4.5 peak sun hours/day, 140 W recovers a 51 km ride in about 3.4 sun hours.

How do I verify the OEM charger voltage and pin polarity on the Lectric XP4?

Our dataset records the Lectric XP4 OEM charger ceiling at 54.6 V DC (confidence: high), but you should never copy a voltage figure blindly from the web. Read the "DC OUTPUT" rating printed on your own original OEM AC wall charger nameplate, then plug the OEM brick in and probe its isolated DC output plug with a digital multimeter to verify both the constant-voltage ceiling and which pin is positive (+) and negative (−) before wiring your Junlei 3015 3-pin lead (port status: sourced).

Can I charge the Lectric XP4 from solar while riding?

No. Direct DC solar kits are designed for stationary daytime charging while parked at home or work, with the panels in full sun and the boost MPPT resting in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge port is active.

Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)

Computed from a consumption rate of 6.2 Wh/km, a 499 Wh pack, 4.5 peak sun hours/day in United States, a 0.70 real-world panel derating factor, and boost MPPT + DC cable efficiency.

Daily DistanceDaily WhRecommended ArrayWiring & VmpSun Hrs to Recover0–100% Full Pack
10 km/day62 Wh100 W (1 panel)1S · 18 V Vmp0.9 hrs5.6 sunny days
20 km/day124 Wh100 W (1 panel)1S · 18 V Vmp1.9 hrs3.4 sunny days
30 km/day186 Wh100 W (1 panel)1S · 18 V Vmp2.8 hrs2.4 sunny days
40 km/day248 Wh100 W (1 panel)1S · 18 V Vmp3.8 hrs1.9 sunny days
51 km/day316 Wh140 W (1 panel)1S · 19.5 V Vmp3.4 hrs1.5 sunny days