Lectric XPedition 2.0
- Battery
- 48 V · 13 Ah624 Wh · NMC
- Motor
- 750 W
- Top speed
- 45 km/h
- Range
- 96 km
- Consumption
- 6.5 Wh/kmestimated
Can You Solar Charge a Lectric XPedition 2.0?
No AC inverter needed · No $500 power station · Plugs into the Junlei 3015 3-pin port
A 140 W solar array (1 × 140 W) feeding a DC boost MPPT controller recovers a 51 km/day commute on the Lectric XPedition 2.0 in about 3.6 peak sun hours (4.5 sun hours/day market average). The XPedition 2.0 uses a 48 V 624 Wh NMC pack (recorded OEM charger ceiling: 54.6 V DC, confidence: High, source — always read your own charger nameplate & verify with a multimeter) and charges through its Junlei 3015 3-pin port.
140 W Solar Array
1 × 140 W (1S)
~3.6 hrs sun for 51 km
Daily 51 km commute recovery
~1.1 yr payoff vs. gas
Saves ~$359/yr
Similar vehicles & kit parts
Riders also viewed
- Aventura-X EV3072 V · 2.9 kWh200 W kit · GX16 aviation plug
EV - EMOVE RoadRunner V348 V · 1.1 kWh100 W kit · XLR 3-pin
EV - Heybike Mars 3.048 V · 0.6 kWh50 W kit · DC 5.5 x 2.5 mm barrel (DC5525)
EV - Heybike Titan48 V · 0.7 kWh100 W kit · DC 5.5 x 2.1 mm barrel (DC5521)
EV - Part140W Foldable solar panelKit part
- DC cable, panel to controller — 4mm² min · 5.26mm² suppliedKit part
Part - MPPT charge controllerKit part
Part
2 · Kit Cost, Payoff Period & Direct DC Efficiency
Should You Solar Charge Your Lectric XPedition 2.0?
Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership versus a new gas scooter, air and noise pollution, and local legal rules in United States — so you can decide for yourself.
How much does a solar kit for a Lectric XPedition 2.0 cost?
A complete direct-DC solar charging kit for the Lectric XPedition 2.0 costs $390 (including 1 × 140 W monocrystalline panels, a DC boost MPPT controller, sized solar cables, and the matched Junlei 3015 3-pin plug) — roughly one-third the cost of a portable power station setup.
Will You Save Money over Gas?
10-Year Cumulative Fuel Savings — Lectric XPedition 2.0
~1.1 yrs
Payoff breakeven vs. buying gas (~$359/yr)
~15.2 yrs
Payoff breakeven vs. wall outlet (~$26/yr)
+$3,920
Net profit vs. gas by Year 10 ($309 in grid kWh avoided)
Is a solar-charged Lectric XPedition 2.0 really cheaper than petrol?
Lectric XPedition 2.0 + Solar
750 W · 0.62 kWh NMC · 45 km/h · 96 km range
$1,939/5 yrs

Honda Ruckus 49cc (Gas)
49cc · 47.6 km/L · 64 km/h
$2,527/5 yrs
Why direct DC boost beats a portable power station
Solar Efficiency
Share of panel wattage that reaches the battery
Charges the Lectric XPedition 2.0's own 624 Wh pack directly without wasting 25–28% of your solar wattage in a DC→AC→DC inverter loop.
Zero home breaker stress (off-grid ready)
Draws 0 W from your home breaker vs. 450 W from the factory AC brick — preventing breaker trips and charging in unpowered sheds or carports.
Will Solar-Charging a Lectric XPedition 2.0 Reduce Air Pollution (CO₂ & PM2.5)?
In United States, the utility power grid averages 380 g CO₂/kWh (16% coal/fossil share). Charging your Lectric XPedition 2.0 directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:
Carbon Emissions per Kilometer (g CO₂/km)
Breathable PM2.5 Air Particles (mg PM2.5/km)
Sources: US EPA eGRID National Average (~380 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.
Will Driving a Solar-Charged Lectric XPedition 2.0 Reduce Noise Pollution?
Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The Lectric XPedition 2.0's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:
Is It Legal to Solar-Charge a Lectric XPedition 2.0 in United States?
Relevant authority: Local AHJ / Utility Interconnection & NEC Article 690
Utility interconnection agreements and municipal roof-solar permits apply to grid-interactive AC photovoltaic systems wired into a home's breaker panel. A portable or ground/shed-placed low-voltage DC solar charger (< 60 V DC, 100-400 W) that plugs straight into an e-bike or scooter battery is a standalone DC appliance and requires no utility approval.
- Zero Utility Interconnection: Never touches 120V/240V household AC wiring.
- Low-Voltage DC (< 60 V): Below NEC high-voltage thresholds with no AC inverter.
- HOA & Renter Friendly: Ground, balcony, or shed placement requires no roof penetration.
Ride more or less than 51 km/day? Adjust your daily distance, panel mounting, and cable runs for the Lectric XPedition 2.0:
Size Your XPedition 2.0 Kit →2a · Head-to-head
How does it compare to popular EVs?
Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (51 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.
Price
new vehicle price- Lectric XPedition 2.0This model
- $1,399
- Rad Power RadRunner
- $1,499
- Heybike Titan
- $1,399
- Heybike Mars 3.0
- $1,099
- Bosch PowerTube 750
- $1,316
Top Speed
- Lectric XPedition 2.0This model
- 45 km/h
- Rad Power RadRunner
- 32 km/h
- Heybike Titan
- 32 km/h
- Heybike Mars 3.0
- —
- Bosch PowerTube 750
- 25 km/h
Range
- Lectric XPedition 2.0This model
- 96 km
- Rad Power RadRunner
- 88 km
- Heybike Titan
- 64 km
- Heybike Mars 3.0
- 105 km
- Bosch PowerTube 750
- 110 km
Battery Size
- Lectric XPedition 2.0This model
- 0.6 kWh
- Rad Power RadRunner
- 0.6 kWh
- Heybike Titan
- 0.7 kWh
- Heybike Mars 3.0
- 0.6 kWh
- Bosch PowerTube 750
- 0.8 kWh
Motor Wattage
- Lectric XPedition 2.0This model
- 750 W
- Rad Power RadRunner
- 750 W
- Heybike Titan
- 750 W
- Heybike Mars 3.0
- 750 W
- Bosch PowerTube 750
- 250 W
Solar Chargeable
— = no plug on record yet- DC charging
- AC charging
- Lectric XPedition 2.0This model
- DC charging: Yes
- AC charging: Yes
- Rad Power RadRunner
- DC charging: Yes
- AC charging: Yes
- Heybike Titan
- DC charging: Yes
- AC charging: Yes
- Heybike Mars 3.0
- DC charging: Yes
- AC charging: Yes
- Bosch PowerTube 750
- DC charging: No
- AC charging: Yes
Cost per km (5 years)
incl. vehicle + kit + upkeep- Lectric XPedition 2.0This model
- $0.02/km
- Rad Power RadRunner
- $0.02/km
- Heybike Titan
- $0.02/km
- Heybike Mars 3.0
- $0.02/km
- Bosch PowerTube 750
- $0.02/km
Cost per km (10 years)
incl. vehicle + kit + upkeep- Lectric XPedition 2.0This model
- $0.011/km
- Rad Power RadRunner
- $0.011/km
- Heybike Titan
- $0.011/km
- Heybike Mars 3.0
- $0.009/km
- Bosch PowerTube 750
- $0.010/km
Compare them side by side, attribute by attribute →
3 · Solar Kit Parts for Lectric XPedition 2.0
What do you need to solar charge a Lectric XPedition 2.0?
Click any part below to open the full parts list with safety disclaimers & live retailer links, or customize your daily distance and cable lengths in the free kit configurator:
1 m
1×
1 m
1×
1×
1×
1×
Optional
Optional
OptionalEstimated core kit total: $390
See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.
Watch: 3D Solar Kit Assembly & Safe Wiring Sequence in Action
Placing the panel in full sun, landing PV and battery leads into the dead MPPT terminals first, verifying CV target voltage on the lit LCD, and closing the strain-relief armor.
4 · Complete BOM, 14-Step Assembly Guide & Safe Verification
How to Charge a Lectric XPedition 2.0 With Free Solar Power
To charge a Lectric XPedition 2.0 directly from sunlight without an AC inverter or portable power station, a 140 W solar array (1 × 140 W) feeds a DC-DC boost MPPT controller that steps the array's 19.5 V Vmp up to your 48 V pack through its Junlei 3015 3-pin port. We built two products specifically for the Lectric XPedition 2.0 so you never have to guess a part, wire gauge, or assembly step:
Your Lectric XPedition 2.0 Parts List (BOM)
Itemizes every required component and safety tool for your XPedition 2.0 kit (estimated core total $390) with direct retailer links — cleanly separated from optional extras so you never overbuy:
- Required Core Hardware (5 items): 1 × 140 W solar panels, DC boost MPPT controller, 5.26 mm² panel cable (5 m run), 5.26 mm² vehicle cable (3 m run), matched Junlei 3015 3-pin plug.
- Required Build & Safety Tools (4 items): Digital multimeter (to test panel Voc & meter your OEM charger), wire cutters/strippers, insulated gloves, and clear safety glasses.
- Optional Extras (Never Required — unticked by default): 3D-printable MPPT strain-relief & button-locking shell, 45° PV cable bend guides, and an optional inline DC fuse (belt-and-braces protection for long runs — not required because the MPPT controller already limits its own output current and the scooter has a main battery fuse).
Solar Kit Assembly Instructions + AI Build Assistant
Our interactive step-by-step build guide generated specifically for your Lectric XPedition 2.0 configuration — taking you from unpacking boxes to a verified solar charge in strict dead-wires-first order:
- Tailored to your exact kit parts: Custom schematic diagrams and exact strip/cut lengths for your 5.26 mm² (5 m) panel run, 5.26 mm² (3 m) vehicle run, and Junlei 3015 3-pin connector.
- Strict dead-wires-first electrical order: Every screw terminal and wire splice is completed while panels are covered/unplugged and the scooter is disconnected — you never handle a live conductor.
- Includes US$5 of AI Build Assistant credit: Snap a photo of your multimeter reading, MPPT terminal wiring, or solder-seal splice at any step for instant verification before plugging in (plus read-aloud audio on every step).
The 4 Build Phases: How Your Lectric XPedition 2.0 Solar Kit Goes Together
Because the charge socket on your Lectric XPedition 2.0 is a live battery terminal, our 14-step assembly guide sequences the build into four distinct phases so you never guess polarity or work on live wires:
Check your BOM, test panel Voc (~23.5 V) in sun & dry-fit the layout
Verify all required parts and safety tools against your Bill of Materials (BOM). Before mounting anything (while still inside the seller's return window), place each panel in full sun and measure open-circuit voltage (~23.5 V DC per panel) with your multimeter. Position the panels in unshaded sun and the boost MPPT in dry ventilated shade, then dry-fit both cable runs before cutting wire.
Wire the array & land both MPPT terminal blocks while completely dead
Join the 1 panels (1S) and check ~23.5 V string Voc with your meter, then leave the panel MC4 leads unclipped (or keep panels covered). Route the 5.26 mm² panel cable and 5.26 mm² vehicle cable, and screw both into the MPPT's PV+/PV− and BAT+/BAT− terminals in one sitting while zero voltage is present.
Meter your isolated OEM charger plug & bench-splice the Junlei 3015 3-pin lead
Never plug bare pigtail wires into the scooter or probe the live vehicle socket blind. Plug your factory AC wall charger into the wall and probe its isolated DC output plug with your multimeter to identify positive (+) and negative (−). At the bench with everything disconnected, slide on the yellow 4.0–6.0 mm² solder-seal tube first, heat-splice the two power conductors, tug-test, insulate unused signal pins separately, and meter for zero continuity between + and −. (An inline DC fuse is optional belt-and-braces protection for long runs, not a requirement, since the MPPT limits its own output and the scooter has a main fuse.)
Boot the MPPT on solar, set your verified CV & current limits, plug in & verify on the dash
Clip the solar array MC4 connectors together first (with the scooter still unplugged) so the MPPT display boots on solar power. Read the DC OUTPUT rating on your own OEM charger nameplate (confirmed by your multimeter) and set the MPPT's constant-voltage (CV) ceiling at or slightly below that figure — never above — along with the current limit. Plug into the Lectric XPedition 2.0, watch watts climb on the controller, and verify after 10 minutes that your scooter's dashboard battery % has risen.
All 14 Steps Generated for Your Lectric XPedition 2.0 Kit
- 1Gather required parts & tools against your Bill of Materials (BOM)Free Sample
- 2Test the panel's open-circuit voltage (~23.5 V Voc) in full sun before mounting
- 3Plan the layout (panels in full sun, boost MPPT in dry shade, dry-fit cable runs)
- 4Mount or place the panel with a 0.5 m seasonal service loop
- 5Run the 5 m (5.26 mm²) panel cable to the controller (leave array unplugged)
- 6Wire the panel cable into the MPPT PV+ and PV− screw terminals while dead
- 7Run the 3 m (5.26 mm²) vehicle DC cable from the MPPT to your parking spot
- 8Wire the vehicle cable into the MPPT BAT+ and BAT− terminals in the same dead sitting
- 9Meter polarity on your isolated OEM charger plug, solder-seal splice the Junlei 3015 3-pin lead at the bench & insulate unused pins
- 10Clip the solar array MC4 leads together to wake the MPPT display (~23.5 V PV in, scooter still unplugged)
- 11Read DC OUTPUT on your OEM charger nameplate, verify with your meter & set the MPPT CV ceiling
- 12Set the MPPT charge current limit at or below your OEM rating (this array supplies ~2.6 A)
- 13Plug the verified Junlei 3015 3-pin connector into the Lectric XPedition 2.0 & watch the MPPT settle into charging
- 14Confirm climbing watts on the MPPT & verify the scooter's dashboard battery % rises after 10 minutes
Recorded Lectric XPedition 2.0 Charger Specs & Connector Family
The table below lists the battery architecture, recorded OEM wall charger specifications with their confidence level and source, and our connector verification status. We never recommend an MPPT voltage setpoint: always read the DC OUTPUT rating on your own OEM charger nameplate and verify it with a multimeter.
| Nominal Voltage | 48 V DC |
|---|---|
| Pack Capacity | 624 Wh (13 Ah) |
| Battery Chemistry | NMC (Removable pack) |
| Recorded OEM Charger Rating | 54.6 V DC max · 2 A (109 W) High |
| Connector Family | Junlei 3015 3-pin High |
| Pin Count & Gender on Vehicle | 3-pin · female (on vehicle) |
| Adapter Verification Status | Sourced · Plug available |
Recorded Data Sources
- Lectric XPedition2 product page, read 2026-11-01: 'A removable 48V, 13Ah (624Wh) lithium-ion battery certified to UL 2271 ... up to 60 miles on a single charge'; 'comes standard with a 2amp charger for 5-7 hour charging'; dual-battery builds up to 35 Ah.
- The same 54.6 V / JUNLEI 3015 charger is listed for the XPedition 2.0.
Solar Kit Assembly Instructions + AI Build Assistant
Follow interactive wiring diagrams for your exact cable gauge and connector family, with an AI build assistant ready to verify photos at every step.
5 · Lectric XPedition 2.0 Solar Charging FAQ & Distance Sizing
Lectric XPedition 2.0 Solar Charging FAQ
How many watts of solar do I need to charge a Lectric XPedition 2.0?
For a 51 km/day (31.7 mi/day) commute (~332 Wh/day), the Lectric XPedition 2.0 needs a 140 W solar array (1 × 140 W) feeding a DC boost MPPT controller. At 4.5 peak sun hours/day, 140 W recovers a 51 km ride in about 3.6 sun hours.
How do I verify the OEM charger voltage and pin polarity on the Lectric XPedition 2.0?
Our dataset records the Lectric XPedition 2.0 OEM charger ceiling at 54.6 V DC (confidence: high), but you should never copy a voltage figure blindly from the web. Read the "DC OUTPUT" rating printed on your own original OEM AC wall charger nameplate, then plug the OEM brick in and probe its isolated DC output plug with a digital multimeter to verify both the constant-voltage ceiling and which pin is positive (+) and negative (−) before wiring your Junlei 3015 3-pin lead (port status: sourced).
Can I charge the Lectric XPedition 2.0 from solar while riding?
No. Direct DC solar kits are designed for stationary daytime charging while parked at home or work, with the panels in full sun and the boost MPPT resting in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge port is active.
Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)
Computed from a consumption rate of 6.5 Wh/km, a 624 Wh pack, 4.5 peak sun hours/day in United States, a 0.70 real-world panel derating factor, and boost MPPT + DC cable efficiency.
| Daily Distance | Daily Wh | Recommended Array | Wiring & Vmp | Sun Hrs to Recover | 0–100% Full Pack |
|---|---|---|---|---|---|
| 10 km/day | 65 Wh | 100 W (1 panel) | 1S · 18 V Vmp | 1 hrs | 7 sunny days |
| 20 km/day | 130 Wh | 100 W (1 panel) | 1S · 18 V Vmp | 2 hrs | 4.2 sunny days |
| 30 km/day | 195 Wh | 100 W (1 panel) | 1S · 18 V Vmp | 3 hrs | 3 sunny days |
| 40 km/day | 260 Wh | 100 W (1 panel) | 1S · 18 V Vmp | 4 hrs | 2.3 sunny days |
| 51 km/day | 332 Wh | 140 W (1 panel) | 1S · 19.5 V Vmp | 3.6 hrs | 1.8 sunny days |

