Razor EcoSmart Metro HD

Electric scooter

Battery
36 V · 6 Ah216 Wh · SLA
Motor
350 W
Top speed
25 km/h
Range
19 km
Consumption
11.2 Wh/kmestimated
$730official store · Nov 2026Buy at Razor

Can You Solar Charge a Razor EcoSmart Metro HD?

Yes, You Can!Direct DC Solar Compatible

No AC inverter needed · No $500 power station · Plugs into the XLR 3-pin port

A 200 W solar array (2 × 100 W in series) feeding a DC boost MPPT controller recovers a 51 km/day commute on the Razor EcoSmart Metro HD in about 4.2 peak sun hours (4.5 sun hours/day market average). The EcoSmart Metro HD uses a 36 V 216 Wh SLA pack (recorded OEM charger ceiling: 43.2 V DC, confidence: High, source — always read your own charger nameplate & verify with a multimeter) and charges through its XLR 3-pin port.

Razor EcoSmart Metro HD — 200 W solar charging kit

200 W Solar Array

2 × 100 W (2S)

~4.2 hrs sun for 51 km

Daily 51 km commute recovery

~1.2 yr payoff vs. gas

Saves ~$359/yr

Complete kit total: $431 · sized for a 51 km/day commute

Similar vehicles & kit parts

Riders also viewed

2 · Kit Cost, Payoff Period & Direct DC Efficiency

Should You Solar Charge Your Razor EcoSmart Metro HD?

Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership versus a new gas scooter, air and noise pollution, and local legal rules in United States — so you can decide for yourself.

How much does a solar kit for a Razor EcoSmart Metro HD cost?

$431 Complete 200 W Kit2 × 100 W Panels + Boost MPPT + Cables & Plug

A complete direct-DC solar charging kit for the Razor EcoSmart Metro HD costs $431 (including 2 × 100 W monocrystalline panels, a DC boost MPPT controller, sized solar cables, and the matched XLR 3-pin plug) — roughly one-third the cost of a portable power station setup.

View Parts List →Itemized 2 × 100 W panels, MPPT, cables & XLR 3-pin plug

Will You Save Money over Gas?

Yes — ~1.2 Yr Payoff vs. Gas

10-Year Cumulative Fuel Savings — Razor EcoSmart Metro HD

vs. buying gas (~$359/yr)vs. wall-outlet electricity (~$44/yr)
$0$1,078$2,155$3,233$4,310Yr 0Yr 1Yr 2Yr 3Yr 4Yr 5Yr 6Yr 7Yr 8Yr 9Yr 10Kit Cost: $431Payoff vs. Gas: ~1.2 yrsPayoff vs. Wall: ~8.4 yrs

~1.2 yrs

Payoff breakeven vs. buying gas (~$359/yr)

~8.4 yrs

Payoff breakeven vs. wall outlet (~$44/yr)

+$3,879

Net profit vs. gas by Year 10 ($529 in grid kWh avoided)

⚡ Head-to-Head Ownership Cost

Is a solar-charged Razor EcoSmart Metro HD really cheaper than petrol?

☀️ Solar-Charged EV🏆 Cheapest
Razor EcoSmart Metro HD

Razor EcoSmart Metro HD + Solar

350 W · 0.22 kWh SLA · 25 km/h · 19.3 km range

$1,311/5 yrs

Vehicle Price$730
Solar Kit + 0 Fuel$431
Service & Tax (5 yrs)$150
VS
⛽ Gas Scooter (Petrol)
Honda Ruckus 49cc (Gas)

Honda Ruckus 49cc (Gas)

49cc · 47.6 km/L · 64 km/h

$2,527/5 yrs

Vehicle Purchase Price$0
5-Yr Petrol (+4%/yr)$2,527
Oil, CVT & Tax (5 yrs)$0
Saves $1,216 over 5 years
51 km/day · incl. purchase price
Energy Cost / 100 km
$0 (Solar)vs.$3
Top Speed
25 km/hvs.64 km/h
Annual Maintenance
$18vs.$0

Why direct DC boost beats a portable power station

Solar Efficiency

Share of panel wattage that reaches the battery

Direct DC Boost (Panel → MPPT → Bike)95%
Portable Power Station (DC → AC → DC)72%

Charges the Razor EcoSmart Metro HD's own 216 Wh pack directly without wasting 25–28% of your solar wattage in a DC→AC→DC inverter loop.

Zero home breaker stress (off-grid ready)

Solar Daytime Charging0 W grid draw
Factory AC Charger (on 900 VA breaker)450 W (50%)

Draws 0 W from your home breaker vs. 450 W from the factory AC brick — preventing breaker trips and charging in unpowered sheds or carports.

Will Solar-Charging a Razor EcoSmart Metro HD Reduce Air Pollution (CO₂ & PM2.5)?

Yes — 0 g Tailpipe, −98% CO₂ & −88% Fine PM2.5 Particles

In United States, the utility power grid averages 380 g CO₂/kWh (16% coal/fossil share). Charging your Razor EcoSmart Metro HD directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:

Carbon Emissions per Kilometer (g CO₂/km)

51 g/km
125cc Gas ScooterPetrol exhaust
5 g/km
EcoSmart Metro HD (Wall Grid)380 g CO₂/kWh (United States)
1 g/km
EcoSmart Metro HD (Solar Kit)−98% vs. gas

Breathable PM2.5 Air Particles (mg PM2.5/km)

28 mg/km
125cc Gas ScooterExhaust soot + brake wear
3.9 mg/km
EcoSmart Metro HD (Wall Grid)Coal plant + tire wear
3.5 mg/km
EcoSmart Metro HD (Solar Kit)0 exhaust soot (−88%)

Sources: US EPA eGRID National Average (~380 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.

Will Driving a Solar-Charged Razor EcoSmart Metro HD Reduce Noise Pollution?

Yes — ~80% Quieter to the Human Ear (53 dBA vs. 76 dBA)

Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The Razor EcoSmart Metro HD's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:

84 dBA
125cc Gas (Accelerating)Loud urban traffic
76 dBA
125cc Gas (30 km/h Cruise)~5× louder than EV
53 dBA
EcoSmart Metro HD (30 km/h Cruise)Quiet conversation level
0 dBA
Solar Kit ChargingNo engine noise — unplug the MPPT fan

Is It Legal to Solar-Charge a Razor EcoSmart Metro HD in United States?

Yes — 100% Legal with No Utility Interconnection Permit in the USNEC Article 690 / Utility Interconnection (standalone low-voltage DC exemption)

Relevant authority: Local AHJ / Utility Interconnection & NEC Article 690

Utility interconnection agreements and municipal roof-solar permits apply to grid-interactive AC photovoltaic systems wired into a home's breaker panel. A portable or ground/shed-placed low-voltage DC solar charger (< 60 V DC, 100-400 W) that plugs straight into an e-bike or scooter battery is a standalone DC appliance and requires no utility approval.

  • Zero Utility Interconnection: Never touches 120V/240V household AC wiring.
  • Low-Voltage DC (< 60 V): Below NEC high-voltage thresholds with no AC inverter.
  • HOA & Renter Friendly: Ground, balcony, or shed placement requires no roof penetration.

Ride more or less than 51 km/day? Adjust your daily distance, panel mounting, and cable runs for the Razor EcoSmart Metro HD:

Size Your EcoSmart Metro HD Kit →

2a · Head-to-head

How does it compare to popular EVs?

Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (51 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.

Price

new vehicle price
Razor EcoSmart Metro HDThis model
$730
EMOVE RoadRunner V3
$1,695
Lectric XP Lite 3
$799
Lectric XP4
$999
Bosch PowerTube 500
$1,000

Top Speed

Razor EcoSmart Metro HDThis model
25 km/h
EMOVE RoadRunner V3
55 km/h
Lectric XP Lite 3
32 km/h
Lectric XP4
45 km/h
Bosch PowerTube 500
25 km/h

Range

Razor EcoSmart Metro HDThis model
19 km
EMOVE RoadRunner V3
81 km
Lectric XP Lite 3
72 km
Lectric XP4
80 km
Bosch PowerTube 500
80 km

Battery Size

Razor EcoSmart Metro HDThis model
0.2 kWh
EMOVE RoadRunner V3
1.1 kWh
Lectric XP Lite 3
0.4 kWh
Lectric XP4
0.5 kWh
Bosch PowerTube 500
0.5 kWh

Motor Wattage

Razor EcoSmart Metro HDThis model
350 W
EMOVE RoadRunner V3
1 kW
Lectric XP Lite 3
300 W
Lectric XP4
500 W
Bosch PowerTube 500
250 W

Solar Chargeable

— = no plug on record yet
DC charging
AC charging
Razor EcoSmart Metro HDThis model
DC charging: not recorded
AC charging: Yes
EMOVE RoadRunner V3
DC charging: not recorded
AC charging: Yes
Lectric XP Lite 3
DC charging: Yes
AC charging: Yes
Lectric XP4
DC charging: Yes
AC charging: Yes
Bosch PowerTube 500
DC charging: No
AC charging: Yes

Cost per km (5 years)

incl. vehicle + kit + upkeep
Razor EcoSmart Metro HDThis model
$0.01/km
EMOVE RoadRunner V3
$0.02/km
Lectric XP Lite 3
$0.01/km
Lectric XP4
$0.02/km
Bosch PowerTube 500
$0.02/km

Cost per km (10 years)

incl. vehicle + kit + upkeep
Razor EcoSmart Metro HDThis model
$0.008/km
EMOVE RoadRunner V3
$0.013/km
Lectric XP Lite 3
$0.007/km
Lectric XP4
$0.008/km
Bosch PowerTube 500
$0.008/km

Compare them side by side, attribute by attribute →

3 · Solar Kit Parts for Razor EcoSmart Metro HD

What do you need to solar charge a Razor EcoSmart Metro HD?

Click any part below to open the full parts list with safety disclaimers & live retailer links, or customize your daily distance and cable lengths in the free kit configurator:

Estimated core kit total: $431

See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.

Watch: 3D Solar Kit Assembly & Safe Wiring Sequence in Action

Placing the panel in full sun, landing PV and battery leads into the dead MPPT terminals first, verifying CV target voltage on the lit LCD, and closing the strain-relief armor.

4 · Complete BOM, 15-Step Assembly Guide & Safe Verification

How to Charge a Razor EcoSmart Metro HD With Free Solar Power

To charge a Razor EcoSmart Metro HD directly from sunlight without an AC inverter or portable power station, a 200 W solar array (2 × 100 W wired in 2S series) feeds a DC-DC boost MPPT controller that steps the array's 36 V Vmp up to your 36 V pack through its XLR 3-pin port. We built two products specifically for the Razor EcoSmart Metro HD so you never have to guess a part, wire gauge, or assembly step:

Product 1 · Free Bill of Materials (BOM)Free Access

Your Razor EcoSmart Metro HD Parts List (BOM)

Itemizes every required component and safety tool for your EcoSmart Metro HD kit (estimated core total $431) with direct retailer links — cleanly separated from optional extras so you never overbuy:

  • Required Core Hardware (5 items): 2 × 100 W solar panels, DC boost MPPT controller, 5.26 mm² panel cable (5 m run), 5.26 mm² vehicle cable (3 m run), matched XLR 3-pin plug.
  • Required Build & Safety Tools (4 items): Digital multimeter (to test panel Voc & meter your OEM charger), wire cutters/strippers, insulated gloves, and clear safety glasses.
  • Optional Extras (Never Required — unticked by default): 3D-printable MPPT strain-relief & button-locking shell, 45° PV cable bend guides, and an optional inline DC fuse (belt-and-braces protection for long runs — not required because the MPPT controller already limits its own output current and the scooter has a main battery fuse).
Product 2 · 15-Step Guide + AI Assistant$19.99 · Includes $5 AI Credit

Solar Kit Assembly Instructions + AI Build Assistant

Our interactive step-by-step build guide generated specifically for your Razor EcoSmart Metro HD configuration — taking you from unpacking boxes to a verified solar charge in strict dead-wires-first order:

  • Tailored to your exact kit parts: Custom schematic diagrams and exact strip/cut lengths for your 5.26 mm² (5 m) panel run, 5.26 mm² (3 m) vehicle run, and XLR 3-pin connector.
  • Strict dead-wires-first electrical order: Every screw terminal and wire splice is completed while panels are covered/unplugged and the scooter is disconnected — you never handle a live conductor.
  • Includes US$5 of AI Build Assistant credit: Snap a photo of your multimeter reading, MPPT terminal wiring, or solder-seal splice at any step for instant verification before plugging in (plus read-aloud audio on every step).

The 4 Build Phases: How Your Razor EcoSmart Metro HD Solar Kit Goes Together

Because the charge socket on your Razor EcoSmart Metro HD is a live battery terminal, our 15-step assembly guide sequences the build into four distinct phases so you never guess polarity or work on live wires:

Phase 1 · Steps 1–4

Check your BOM, test panel Voc (~22.4 V) in sun & dry-fit the layout

Verify all required parts and safety tools against your Bill of Materials (BOM). Before mounting anything (while still inside the seller's return window), place each panel in full sun and measure open-circuit voltage (~22.4 V DC per panel) with your multimeter. Position the panels in unshaded sun and the boost MPPT in dry ventilated shade, then dry-fit both cable runs before cutting wire.

Phase 2 · Steps 5–9

Wire the array & land both MPPT terminal blocks while completely dead

Join the 2 panels (2S) and check ~44.8 V string Voc with your meter, then leave the panel MC4 leads unclipped (or keep panels covered). Route the 5.26 mm² panel cable and 5.26 mm² vehicle cable, and screw both into the MPPT's PV+/PV− and BAT+/BAT− terminals in one sitting while zero voltage is present.

Phase 3 · Step 10

Meter your isolated OEM charger plug & bench-splice the XLR 3-pin lead

Never plug bare pigtail wires into the scooter or probe the live vehicle socket blind. Plug your factory AC wall charger into the wall and probe its isolated DC output plug with your multimeter to identify positive (+) and negative (−). At the bench with everything disconnected, slide on the yellow 4.0–6.0 mm² solder-seal tube first, heat-splice the two power conductors, tug-test, insulate unused signal pins separately, and meter for zero continuity between + and −. (An inline DC fuse is optional belt-and-braces protection for long runs, not a requirement, since the MPPT limits its own output and the scooter has a main fuse.)

Phase 4 · Steps 11–15

Boot the MPPT on solar, set your verified CV & current limits, plug in & verify on the dash

Clip the solar array MC4 connectors together first (with the scooter still unplugged) so the MPPT display boots on solar power. Read the DC OUTPUT rating on your own OEM charger nameplate (confirmed by your multimeter) and set the MPPT's constant-voltage (CV) ceiling at or slightly below that figure — never above — along with the current limit. Plug into the Razor EcoSmart Metro HD, watch watts climb on the controller, and verify after 10 minutes that your scooter's dashboard battery % has risen.

Inside the Solar Kit Assembly Instructions Product (15 Tailored Steps)

All 15 Steps Generated for Your Razor EcoSmart Metro HD Kit

Read Step 1 Free & Preview Guide →
  1. 1Gather required parts & tools against your Bill of Materials (BOM)Free Sample
  2. 2Test each panel's open-circuit voltage (~22.4 V Voc) in full sun before mounting
  3. 3Plan the layout (panels in full sun, boost MPPT in dry shade, dry-fit cable runs)
  4. 4Mount or place the 2 panels with a 0.5 m seasonal service loop
  5. 5Wire the 2 panels in 2S & verify ~44.8 V string Voc with your multimeter
  6. 6Run the 5 m (5.26 mm²) panel cable to the controller (leave array unplugged)
  7. 7Wire the panel cable into the MPPT PV+ and PV− screw terminals while dead
  8. 8Run the 3 m (5.26 mm²) vehicle DC cable from the MPPT to your parking spot
  9. 9Wire the vehicle cable into the MPPT BAT+ and BAT− terminals in the same dead sitting
  10. 10Meter polarity on your isolated OEM charger plug & assemble the XLR 3-pin adapter at the bench
  11. 11Clip the solar array MC4 leads together to wake the MPPT display (~44.8 V PV in, scooter still unplugged)
  12. 12Read DC OUTPUT on your OEM charger nameplate, verify with your meter & set the MPPT CV ceiling
  13. 13Set the MPPT charge current limit at or below your OEM rating (this array supplies ~4.6 A)
  14. 14Plug the verified XLR 3-pin connector into the Razor EcoSmart Metro HD & watch the MPPT settle into charging
  15. 15Confirm climbing watts on the MPPT & verify the scooter's dashboard battery % rises after 10 minutes

Step 1 is fully unlocked as a free sample (including the read-aloud player & Ask AI composer). Unlock all 15 steps with custom wiring diagrams and US$5 of AI Build Assistant credit for a one-time US$19.99 (no subscription).

Recorded Razor EcoSmart Metro HD Charger Specs & Connector Family

The table below lists the battery architecture, recorded OEM wall charger specifications with their confidence level and source, and our connector verification status. We never recommend an MPPT voltage setpoint: always read the DC OUTPUT rating on your own OEM charger nameplate and verify it with a multimeter.

Nominal Voltage36 V DC
Pack Capacity216 Wh (6 Ah)
Battery ChemistrySLA (Fixed on-board pack)
Recorded OEM Charger Rating43.2 V DC max · 1.5 A (64.8 W) High
Connector FamilyXLR 3-pin High
Pin Count & Gender on Vehicle3-pin · female (on vehicle)
Adapter Verification StatusIdentified · Family confirmed

Engineering Note for 72V Packs (LFP / NMC vs SLA / Graphene)

72V lithium packs (23S LFP or 20S NMC on Polytron, Alva, and Gesits) have a recorded 84.0 V DC OEM charger ceiling. For 72V mopeds using 6 × 12V SLA / Graphene blocks (100% resting OCV ~76.8–78.0 V, full cyclic absorption 86.4–88.2 V), solar up to 84.0 V delivers ~80–90% daily bulk charge recovery — then plug into your OEM AC wall charger once a week to complete the 86.4–88.2 V absorption stage and prevent plate sulfation.

Recorded Data Sources

Solar Kit Assembly Instructions + AI Build Assistant

Follow interactive wiring diagrams for your exact cable gauge and connector family, with an AI build assistant ready to verify photos at every step.

Open Assembly Guide →

5 · Razor EcoSmart Metro HD Solar Charging FAQ & Distance Sizing

Razor EcoSmart Metro HD Solar Charging FAQ

How many watts of solar do I need to charge a Razor EcoSmart Metro HD?

For a 51 km/day (31.7 mi/day) commute (~571 Wh/day), the Razor EcoSmart Metro HD needs a 200 W solar array (2 × 100 W wired in series) feeding a DC boost MPPT controller. At 4.5 peak sun hours/day, 200 W recovers a 51 km ride in about 4.2 sun hours.

How does solar charging work on 72V SLA / Graphene packs vs Lithium?

A 72V SLA/Graphene pack (6 × 12V blocks) rests at ~76.8–78.0 V when full and reaches cyclic absorption at 86.4–88.2 V. A boost MPPT capped at 84.0 V delivers ~80–90% daily bulk charge recovery during the day — plenty for a daily commute. If your pack is SLA/Graphene, plug into your OEM AC wall charger once a week to complete the 86.4–88.2 V absorption stage and prevent plate sulfation.

How do I verify the OEM charger voltage and pin polarity on the Razor EcoSmart Metro HD?

Our dataset records the Razor EcoSmart Metro HD OEM charger ceiling at 43.2 V DC (confidence: high), but you should never copy a voltage figure blindly from the web. Read the "DC OUTPUT" rating printed on your own original OEM AC wall charger nameplate, then plug the OEM brick in and probe its isolated DC output plug with a digital multimeter to verify both the constant-voltage ceiling and which pin is positive (+) and negative (−) before wiring your XLR 3-pin lead (port status: identified).

Can I charge the Razor EcoSmart Metro HD from solar while riding?

No. Direct DC solar kits are designed for stationary daytime charging while parked at home or work, with the panels in full sun and the boost MPPT resting in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge port is active.

Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)

Computed from a consumption rate of 11.2 Wh/km, a 216 Wh pack, 4.5 peak sun hours/day in United States, a 0.70 real-world panel derating factor, and boost MPPT + DC cable efficiency.

Daily DistanceDaily WhRecommended ArrayWiring & VmpSun Hrs to Recover0–100% Full Pack
10 km/day112 Wh100 W (1 panel)1S · 18 V Vmp1.7 hrs1.8 sunny days
20 km/day224 Wh100 W (1 panel)1S · 18 V Vmp3.4 hrs0.9 sunny days
30 km/day336 Wh140 W (1 panel)1S · 19.5 V Vmp3.6 hrs0.6 sunny days
40 km/day448 Wh200 W (2 panels)2S · 36 V Vmp3.3 hrs0.5 sunny days
51 km/day571 Wh200 W (2 panels)2S · 36 V Vmp4.2 hrs0.4 sunny days