Ride1Up Revv1 DRT

Electric bike · 2025

Battery
52 V · 20 Ah1,040 Wh · NMC
Motor
1,000 W
Top speed
45 km/h
Range
97 km
Consumption
10.8 Wh/kmestimated
$2,095official store · Nov 2026Buy at Ride1Up

Can You Solar Charge a Ride1Up Revv1 DRT?

Yes, You Can!Direct DC Solar Compatible

No AC inverter needed · No $500 power station · Plugs into the Reention 3-pin (mini XLR) port

A 200 W solar array (2 × 100 W in series) feeding a DC boost MPPT controller recovers a 51 km/day commute on the Ride1Up Revv1 DRT in about 4.1 peak sun hours (4.5 sun hours/day market average). The Revv1 DRT uses a 52 V 1,040 Wh NMC pack (recorded OEM charger ceiling: 58.8 V DC, confidence: High, source — always read your own charger nameplate & verify with a multimeter) and charges through its Reention 3-pin (mini XLR) port.

Ride1Up Revv1 DRT — 200 W solar charging kit

200 W Solar Array

2 × 100 W (2S)

~4.1 hrs sun for 51 km

Daily 51 km commute recovery

~1.2 yr payoff vs. gas

Saves ~$359/yr

Complete kit total: $431 · sized for a 51 km/day commute

Similar vehicles & kit parts

Riders also viewed

2 · Kit Cost, Payoff Period & Direct DC Efficiency

Should You Solar Charge Your Ride1Up Revv1 DRT?

Let's consider the important factors — upfront kit cost, payback against buying gas and wall electricity, total cost of ownership versus a new gas scooter, air and noise pollution, and local legal rules in United States — so you can decide for yourself.

How much does a solar kit for a Ride1Up Revv1 DRT cost?

$431 Complete 200 W Kit2 × 100 W Panels + Boost MPPT + Cables & Plug

A complete direct-DC solar charging kit for the Ride1Up Revv1 DRT costs $431 (including 2 × 100 W monocrystalline panels, a DC boost MPPT controller, sized solar cables, and the matched Reention 3-pin (mini XLR) plug) — roughly one-third the cost of a portable power station setup.

View Parts List →Itemized 2 × 100 W panels, MPPT, cables & Reention 3-pin (mini XLR) plug

Will You Save Money over Gas?

Yes — ~1.2 Yr Payoff vs. Gas

10-Year Cumulative Fuel Savings — Ride1Up Revv1 DRT

vs. buying gas (~$359/yr)vs. wall-outlet electricity (~$43/yr)
$0$1,078$2,155$3,233$4,310Yr 0Yr 1Yr 2Yr 3Yr 4Yr 5Yr 6Yr 7Yr 8Yr 9Yr 10Kit Cost: $431Payoff vs. Gas: ~1.2 yrsPayoff vs. Wall: ~8.6 yrs

~1.2 yrs

Payoff breakeven vs. buying gas (~$359/yr)

~8.6 yrs

Payoff breakeven vs. wall outlet (~$43/yr)

+$3,879

Net profit vs. gas by Year 10 ($512 in grid kWh avoided)

⚡ Head-to-Head Ownership Cost

Is a solar-charged Ride1Up Revv1 DRT really cheaper than petrol?

☀️ Solar-Charged EV
Ride1Up Revv1 DRT

Ride1Up Revv1 DRT + Solar

1 kW · 1.04 kWh NMC · 45 km/h · 96.6 km range

$2,676/5 yrs

Vehicle Price$2,095
Solar Kit + 0 Fuel$431
Service & Tax (5 yrs)$150
VS
⛽ Gas Scooter (Petrol)🏆 Cheapest
Honda Ruckus 49cc (Gas)

Honda Ruckus 49cc (Gas)

49cc · 47.6 km/L · 64 km/h

$2,527/5 yrs

Vehicle Purchase Price$0
5-Yr Petrol (+4%/yr)$2,527
Oil, CVT & Tax (5 yrs)$0
Costs $149 more over 5 years
51 km/day · incl. purchase price
Energy Cost / 100 km
$0 (Solar)vs.$3
Top Speed
45 km/hvs.64 km/h
Annual Maintenance
$18vs.$0

Why direct DC boost beats a portable power station

Solar Efficiency

Share of panel wattage that reaches the battery

Direct DC Boost (Panel → MPPT → Bike)95%
Portable Power Station (DC → AC → DC)72%

Charges the Ride1Up Revv1 DRT's own 1,040 Wh pack directly without wasting 25–28% of your solar wattage in a DC→AC→DC inverter loop.

Zero home breaker stress (off-grid ready)

Solar Daytime Charging0 W grid draw
Factory AC Charger (on 900 VA breaker)450 W (50%)

Draws 0 W from your home breaker vs. 450 W from the factory AC brick — preventing breaker trips and charging in unpowered sheds or carports.

Will Solar-Charging a Ride1Up Revv1 DRT Reduce Air Pollution (CO₂ & PM2.5)?

Yes — 0 g Tailpipe, −98% CO₂ & −88% Fine PM2.5 Particles

In United States, the utility power grid averages 380 g CO₂/kWh (16% coal/fossil share). Charging your Ride1Up Revv1 DRT directly from solar eliminates both tailpipe exhaust and power-plant smokestack emissions:

Carbon Emissions per Kilometer (g CO₂/km)

51 g/km
125cc Gas ScooterPetrol exhaust
5 g/km
Revv1 DRT (Wall Grid)380 g CO₂/kWh (United States)
1 g/km
Revv1 DRT (Solar Kit)−98% vs. gas

Breathable PM2.5 Air Particles (mg PM2.5/km)

28 mg/km
125cc Gas ScooterExhaust soot + brake wear
3.9 mg/km
Revv1 DRT (Wall Grid)Coal plant + tire wear
3.5 mg/km
Revv1 DRT (Solar Kit)0 exhaust soot (−88%)

Sources: US EPA eGRID National Average (~380 gCO2/kWh); EMEP/EEA Two-Wheeler Emission Inventory & IPCC AR6.

Will Driving a Solar-Charged Ride1Up Revv1 DRT Reduce Noise Pollution?

Yes — ~80% Quieter to the Human Ear (53 dBA vs. 76 dBA)

Decibels (dBA) are logarithmic: every +10 dB sounds twice as loud to the human ear. The Ride1Up Revv1 DRT's brushless electric motor cuts city pass-by noise by 23 dBA (~80% quieter) compared to a 125cc gas scooter, and solar-charges at 0 dBA:

84 dBA
125cc Gas (Accelerating)Loud urban traffic
76 dBA
125cc Gas (30 km/h Cruise)~5× louder than EV
53 dBA
Revv1 DRT (30 km/h Cruise)Quiet conversation level
0 dBA
Solar Kit ChargingNo engine noise — unplug the MPPT fan

Is It Legal to Solar-Charge a Ride1Up Revv1 DRT in United States?

Yes — 100% Legal with No Utility Interconnection Permit in the USNEC Article 690 / Utility Interconnection (standalone low-voltage DC exemption)

Relevant authority: Local AHJ / Utility Interconnection & NEC Article 690

Utility interconnection agreements and municipal roof-solar permits apply to grid-interactive AC photovoltaic systems wired into a home's breaker panel. A portable or ground/shed-placed low-voltage DC solar charger (< 60 V DC, 100-400 W) that plugs straight into an e-bike or scooter battery is a standalone DC appliance and requires no utility approval.

  • Zero Utility Interconnection: Never touches 120V/240V household AC wiring.
  • Low-Voltage DC (< 60 V): Below NEC high-voltage thresholds with no AC inverter.
  • HOA & Renter Friendly: Ground, balcony, or shed placement requires no roof penetration.

Ride more or less than 51 km/day? Adjust your daily distance, panel mounting, and cable runs for the Ride1Up Revv1 DRT:

Size Your Revv1 DRT Kit →

2a · Head-to-head

How does it compare to popular EVs?

Bars are scaled to the highest value in this group. Cost per km = vehicle price + its solar kit + upkeep, over the same distance for every row (51 km/day for 5 or 10 years); a model with no solar kit pays for grid energy instead. Prices are this market's own figures, shown in your display currency.

Price

new vehicle price
Ride1Up Revv1 DRTThis model
$2,095
QuietKat Lynx
$2,499
Rad Power Radster Road
$1,999
Rad Power Radster Trail
$1,999
Rad Power RadExpand 5 Plus
$1,899

Top Speed

Ride1Up Revv1 DRTThis model
45 km/h
QuietKat Lynx
45 km/h
Rad Power Radster Road
45 km/h
Rad Power Radster Trail
45 km/h
Rad Power RadExpand 5 Plus
32 km/h

Range

Ride1Up Revv1 DRTThis model
97 km
QuietKat Lynx
97 km
Rad Power Radster Road
105 km
Rad Power Radster Trail
105 km
Rad Power RadExpand 5 Plus
97 km

Battery Size

Ride1Up Revv1 DRTThis model
1.0 kWh
QuietKat Lynx
1.0 kWh
Rad Power Radster Road
0.7 kWh
Rad Power Radster Trail
0.7 kWh
Rad Power RadExpand 5 Plus
0.7 kWh

Motor Wattage

Ride1Up Revv1 DRTThis model
1 kW
QuietKat Lynx
1 kW
Rad Power Radster Road
750 W
Rad Power Radster Trail
750 W
Rad Power RadExpand 5 Plus
750 W

Solar Chargeable

— = no plug on record yet
DC charging
AC charging
Ride1Up Revv1 DRTThis model
DC charging: not recorded
AC charging: Yes
QuietKat Lynx
DC charging: not recorded
AC charging: Yes
Rad Power Radster Road
DC charging: Yes
AC charging: Yes
Rad Power Radster Trail
DC charging: Yes
AC charging: Yes
Rad Power RadExpand 5 Plus
DC charging: Yes
AC charging: Yes

Cost per km (5 years)

incl. vehicle + kit + upkeep
Ride1Up Revv1 DRTThis model
$0.03/km
QuietKat Lynx
$0.03/km
Rad Power Radster Road
$0.03/km
Rad Power Radster Trail
$0.03/km
Rad Power RadExpand 5 Plus
$0.03/km

Cost per km (10 years)

incl. vehicle + kit + upkeep
Ride1Up Revv1 DRTThis model
$0.02/km
QuietKat Lynx
$0.02/km
Rad Power Radster Road
$0.01/km
Rad Power Radster Trail
$0.01/km
Rad Power RadExpand 5 Plus
$0.01/km

Compare them side by side, attribute by attribute →

3 · Solar Kit Parts for Ride1Up Revv1 DRT

What do you need to solar charge a Ride1Up Revv1 DRT?

Click any part below to open the full parts list with safety disclaimers & live retailer links, or customize your daily distance and cable lengths in the free kit configurator:

Estimated core kit total: $431

See per-item pricing, electrical safety disclaimers, and direct local retailer links on the full parts list page.

Watch: 3D Solar Kit Assembly & Safe Wiring Sequence in Action

Placing the panel in full sun, landing PV and battery leads into the dead MPPT terminals first, verifying CV target voltage on the lit LCD, and closing the strain-relief armor.

4 · Complete BOM, 15-Step Assembly Guide & Safe Verification

How to Charge a Ride1Up Revv1 DRT With Free Solar Power

To charge a Ride1Up Revv1 DRT directly from sunlight without an AC inverter or portable power station, a 200 W solar array (2 × 100 W wired in 2S series) feeds a DC-DC boost MPPT controller that steps the array's 36 V Vmp up to your 52 V pack through its Reention 3-pin (mini XLR) port. We built two products specifically for the Ride1Up Revv1 DRT so you never have to guess a part, wire gauge, or assembly step:

Product 1 · Free Bill of Materials (BOM)Free Access

Your Ride1Up Revv1 DRT Parts List (BOM)

Itemizes every required component and safety tool for your Revv1 DRT kit (estimated core total $431) with direct retailer links — cleanly separated from optional extras so you never overbuy:

  • Required Core Hardware (5 items): 2 × 100 W solar panels, DC boost MPPT controller, 5.26 mm² panel cable (5 m run), 5.26 mm² vehicle cable (3 m run), matched Reention 3-pin (mini XLR) plug.
  • Required Build & Safety Tools (4 items): Digital multimeter (to test panel Voc & meter your OEM charger), wire cutters/strippers, insulated gloves, and clear safety glasses.
  • Optional Extras (Never Required — unticked by default): 3D-printable MPPT strain-relief & button-locking shell, 45° PV cable bend guides, and an optional inline DC fuse (belt-and-braces protection for long runs — not required because the MPPT controller already limits its own output current and the scooter has a main battery fuse).
Product 2 · 15-Step Guide + AI Assistant$19.99 · Includes $5 AI Credit

Solar Kit Assembly Instructions + AI Build Assistant

Our interactive step-by-step build guide generated specifically for your Ride1Up Revv1 DRT configuration — taking you from unpacking boxes to a verified solar charge in strict dead-wires-first order:

  • Tailored to your exact kit parts: Custom schematic diagrams and exact strip/cut lengths for your 5.26 mm² (5 m) panel run, 5.26 mm² (3 m) vehicle run, and Reention 3-pin (mini XLR) connector.
  • Strict dead-wires-first electrical order: Every screw terminal and wire splice is completed while panels are covered/unplugged and the scooter is disconnected — you never handle a live conductor.
  • Includes US$5 of AI Build Assistant credit: Snap a photo of your multimeter reading, MPPT terminal wiring, or solder-seal splice at any step for instant verification before plugging in (plus read-aloud audio on every step).

The 4 Build Phases: How Your Ride1Up Revv1 DRT Solar Kit Goes Together

Because the charge socket on your Ride1Up Revv1 DRT is a live battery terminal, our 15-step assembly guide sequences the build into four distinct phases so you never guess polarity or work on live wires:

Phase 1 · Steps 1–4

Check your BOM, test panel Voc (~22.4 V) in sun & dry-fit the layout

Verify all required parts and safety tools against your Bill of Materials (BOM). Before mounting anything (while still inside the seller's return window), place each panel in full sun and measure open-circuit voltage (~22.4 V DC per panel) with your multimeter. Position the panels in unshaded sun and the boost MPPT in dry ventilated shade, then dry-fit both cable runs before cutting wire.

Phase 2 · Steps 5–9

Wire the array & land both MPPT terminal blocks while completely dead

Join the 2 panels (2S) and check ~44.8 V string Voc with your meter, then leave the panel MC4 leads unclipped (or keep panels covered). Route the 5.26 mm² panel cable and 5.26 mm² vehicle cable, and screw both into the MPPT's PV+/PV− and BAT+/BAT− terminals in one sitting while zero voltage is present.

Phase 3 · Step 10

Meter your isolated OEM charger plug & bench-splice the Reention 3-pin (mini XLR) lead

Never plug bare pigtail wires into the scooter or probe the live vehicle socket blind. Plug your factory AC wall charger into the wall and probe its isolated DC output plug with your multimeter to identify positive (+) and negative (−). At the bench with everything disconnected, slide on the yellow 4.0–6.0 mm² solder-seal tube first, heat-splice the two power conductors, tug-test, insulate unused signal pins separately, and meter for zero continuity between + and −. (An inline DC fuse is optional belt-and-braces protection for long runs, not a requirement, since the MPPT limits its own output and the scooter has a main fuse.)

Phase 4 · Steps 11–15

Boot the MPPT on solar, set your verified CV & current limits, plug in & verify on the dash

Clip the solar array MC4 connectors together first (with the scooter still unplugged) so the MPPT display boots on solar power. Read the DC OUTPUT rating on your own OEM charger nameplate (confirmed by your multimeter) and set the MPPT's constant-voltage (CV) ceiling at or slightly below that figure — never above — along with the current limit. Plug into the Ride1Up Revv1 DRT, watch watts climb on the controller, and verify after 10 minutes that your scooter's dashboard battery % has risen.

Inside the Solar Kit Assembly Instructions Product (15 Tailored Steps)

All 15 Steps Generated for Your Ride1Up Revv1 DRT Kit

Read Step 1 Free & Preview Guide →
  1. 1Gather required parts & tools against your Bill of Materials (BOM)Free Sample
  2. 2Test each panel's open-circuit voltage (~22.4 V Voc) in full sun before mounting
  3. 3Plan the layout (panels in full sun, boost MPPT in dry shade, dry-fit cable runs)
  4. 4Mount or place the 2 panels with a 0.5 m seasonal service loop
  5. 5Wire the 2 panels in 2S & verify ~44.8 V string Voc with your multimeter
  6. 6Run the 5 m (5.26 mm²) panel cable to the controller (leave array unplugged)
  7. 7Wire the panel cable into the MPPT PV+ and PV− screw terminals while dead
  8. 8Run the 3 m (5.26 mm²) vehicle DC cable from the MPPT to your parking spot
  9. 9Wire the vehicle cable into the MPPT BAT+ and BAT− terminals in the same dead sitting
  10. 10Meter polarity on your isolated OEM charger plug & assemble the Reention 3-pin (mini XLR) adapter at the bench
  11. 11Clip the solar array MC4 leads together to wake the MPPT display (~44.8 V PV in, scooter still unplugged)
  12. 12Read DC OUTPUT on your OEM charger nameplate, verify with your meter & set the MPPT CV ceiling
  13. 13Set the MPPT charge current limit at or below your OEM rating (this array supplies ~3.4 A)
  14. 14Plug the verified Reention 3-pin (mini XLR) connector into the Ride1Up Revv1 DRT & watch the MPPT settle into charging
  15. 15Confirm climbing watts on the MPPT & verify the scooter's dashboard battery % rises after 10 minutes

Step 1 is fully unlocked as a free sample (including the read-aloud player & Ask AI composer). Unlock all 15 steps with custom wiring diagrams and US$5 of AI Build Assistant credit for a one-time US$19.99 (no subscription).

Recorded Ride1Up Revv1 DRT Charger Specs & Connector Family

The table below lists the battery architecture, recorded OEM wall charger specifications with their confidence level and source, and our connector verification status. We never recommend an MPPT voltage setpoint: always read the DC OUTPUT rating on your own OEM charger nameplate and verify it with a multimeter.

Nominal Voltage52 V DC
Pack Capacity1,040 Wh (20 Ah)
Battery ChemistryNMC (Removable pack)
Recorded OEM Charger Rating58.8 V DC max · 4 A (235.2 W) High
Connector FamilyReention 3-pin (mini XLR) High
Pin Count & Gender on Vehicle3-pin · female (on vehicle)
Adapter Verification StatusIdentified · Family confirmed

Solar Kit Assembly Instructions + AI Build Assistant

Follow interactive wiring diagrams for your exact cable gauge and connector family, with an AI build assistant ready to verify photos at every step.

Open Assembly Guide →

5 · Ride1Up Revv1 DRT Solar Charging FAQ & Distance Sizing

Ride1Up Revv1 DRT Solar Charging FAQ

How many watts of solar do I need to charge a Ride1Up Revv1 DRT?

For a 51 km/day (31.7 mi/day) commute (~551 Wh/day), the Ride1Up Revv1 DRT needs a 200 W solar array (2 × 100 W wired in series) feeding a DC boost MPPT controller. At 4.5 peak sun hours/day, 200 W recovers a 51 km ride in about 4.1 sun hours.

How do I verify the OEM charger voltage and pin polarity on the Ride1Up Revv1 DRT?

Our dataset records the Ride1Up Revv1 DRT OEM charger ceiling at 58.8 V DC (confidence: high), but you should never copy a voltage figure blindly from the web. Read the "DC OUTPUT" rating printed on your own original OEM AC wall charger nameplate, then plug the OEM brick in and probe its isolated DC output plug with a digital multimeter to verify both the constant-voltage ceiling and which pin is positive (+) and negative (−) before wiring your Reention 3-pin (mini XLR) lead (port status: identified).

Can I charge the Ride1Up Revv1 DRT from solar while riding?

No. Direct DC solar kits are designed for stationary daytime charging while parked at home or work, with the panels in full sun and the boost MPPT resting in ventilated shade. Many vehicle BMS units also inhibit throttle output while the charge port is active.

Sunshine Hours & Array Sizing by Daily Distance (10–40 km/day)

Computed from a consumption rate of 10.8 Wh/km, a 1,040 Wh pack, 4.5 peak sun hours/day in United States, a 0.70 real-world panel derating factor, and boost MPPT + DC cable efficiency.

Daily DistanceDaily WhRecommended ArrayWiring & VmpSun Hrs to Recover0–100% Full Pack
10 km/day108 Wh100 W (1 panel)1S · 18 V Vmp1.7 hrs8.8 sunny days
20 km/day216 Wh100 W (1 panel)1S · 18 V Vmp3.3 hrs4.4 sunny days
30 km/day324 Wh140 W (1 panel)1S · 19.5 V Vmp3.6 hrs3.2 sunny days
40 km/day432 Wh200 W (2 panels)2S · 36 V Vmp3.2 hrs2.3 sunny days
51 km/day551 Wh200 W (2 panels)2S · 36 V Vmp4.1 hrs1.8 sunny days