What Is an MPPT Charge Controller?
Summary
MPPT stands for maximum power point tracking. An MPPT charge controller holds a solar panel at the voltage where it makes the most power and converts the difference into extra charging current, instead of dragging the panel down to battery voltage the way a simple PWM controller does.
The Letters
What Does MPPT Stand for?
MPPT stands for maximum power point tracking. It is why one solar charge controller gets more out of a panel than another.
A charge controller sits between a solar panel and a battery and manages how the battery is charged. There are two common kinds, PWM and MPPT, and the difference between them is what they do with the panel's voltage.
What an MPPT charge controller does, and whether you need one
The Panel
A Solar Panel Has One Best Voltage
A solar panel does not have one fixed output. Its power depends on the voltage it is held at, and there is one voltage where it makes the most power. That is the maximum power point.
Picture power plotted against voltage as a hill with a single peak. Hold the panel at a voltage to either side of the peak and it makes less power than it could. A panel's label prints the peak for standard test conditions: the voltage is listed as Vmp and the current as Imp.
And the peak moves: with the sun, with cloud, and with the panel's temperature. A controller that wants the most from a panel cannot find the point once and stop. It has to keep following it.
The Simple Controller
How a PWM Controller Works
The simple kind of controller, called PWM, connects the panel straight to the battery. The panel is dragged down to battery voltage.
A battery sits at its own voltage, and that is usually below the panel's best point. A PWM controller is in effect a switch: when it is on, the panel and the battery are tied together and the panel has to run at the battery's voltage, not its own.
A worked example. A 100 W panel in our catalogue (Renogy RNG-100D-SS 100 W 12 V monocrystalline panel) has its maximum power point at 20.4 V and 4.91 A. Put it on a 12 V battery that is sitting at 13 V part-way through charging, and the panel is held at 13 V. At roughly the same current, that is about 60 W. The rest is never made.
The 13 V is an illustration of a 12 V battery mid-charge, not a setting, and the sum treats the panel's current as constant when its voltage is pulled down. That is the usual simplification, which is why the result is given as "about".
The Tracking Controller
What an MPPT Controller Does Instead
An MPPT controller puts a DC-DC converter in between. The panel is held at its best voltage, and the converter trades the extra voltage for extra current, which is what the battery can use.
Power is voltage multiplied by current. The converter takes power in at the panel's higher voltage and lower current and hands it on at the battery's lower voltage and higher current. Apart from a small loss in the converter itself, the power is the same on both sides.
Same panel, same sun, two controllers
PWM controller
pulled down from 20.4 V
The rest is never made.
MPPT controller
small converter loss
The extra voltage becomes extra current.
So with the same panel and the same sun, nearly all of the panel's power reaches the battery. And as the light changes, the controller keeps hunting for the point where the panel makes the most. That is the tracking.
Side by Side
MPPT vs PWM
A PWM controller ties the panel to the battery. An MPPT controller lets the panel run at its best voltage and converts the difference into charging current.
| PWM | MPPT | |
|---|---|---|
| What is inside | A switch between panel and battery | A DC-DC converter between panel and battery |
| Panel voltage while charging | Dragged down to battery voltage | Held at the panel's maximum power point |
| Panel voltage above battery voltage | Never turned into power | Converted into extra charging current |
| When the light changes | Stays at battery voltage | Follows the maximum power point as it moves |
| Price | Lower | Higher |
| A good fit when | Panel voltage is close to battery voltage | Panel voltage is well above the battery, or there is only room for one or two panels |
| Battery voltage above panel voltage | Cannot charge it | Only a boost (step-up) MPPT can |
The Catch
Buck vs Boost: Most MPPT Controllers Only Step Down
Almost every MPPT controller steps voltage down, so the panel has to be at a higher voltage than the battery. A 48 V or higher pack charged from one or two panels needs a boost MPPT, which steps voltage up.
A step-down converter is called a buck converter, and it is what most MPPT controllers are built around. It works for the common case: a panel, or a string of panels, at a higher voltage than a 12 V or 24 V battery.
An e-bike or scooter battery turns that round. The catalogue panel above runs at 20.4 V at its best point. A 48 V, 60 V or 72 V pack sits far above that, and one or two panels do not reach it. A buck MPPT has nothing to step down from, so it delivers no charge at all.
A step-up converter is called a boost converter. A boost MPPT tracks the panel's maximum power point in the same way and then raises the voltage to the battery's level, giving up current to do it. It is still a DC-DC converter: it feeds DC into a battery's charge port, within the limits printed on that battery's own charger.
Boost MPPT controllers in our catalogue
As an Amazon Associate I earn from qualifying purchases.
Callsun
DY-MLUE-500W 15 A boost MPPT
Genasun
GVB-8-Li-41.7V boost MPPT (36 V Li-ion 10S)
Genasun
GVB-8-Li-54.2V-WP boost MPPT (48 V Li-ion 13S, IP68)
Prices are subject to change.
Every controller listed here is a boost (step-up) MPPT; we do not list a step-down one. A voltage in a model name is the manufacturer's fixed profile for that part, not a setting we recommend. Match a controller to the DC output printed on your own charger's label.
Whichever kind you use, its output has to match your own battery. The authority on that is the DC output printed on the nameplate of the charger that came with the battery or vehicle, verified by measuring that charger's output plug with a multimeter. We do not publish a number to set, and if you cannot find yours, ask the manufacturer rather than guessing.
The Buying Question
Do You Need an MPPT Controller?
If your panel's voltage is close to your battery's, a PWM controller is cheap and does the job. If the panel voltage is well above the battery, MPPT recovers power that PWM throws away.
Close voltages: a PWM controller loses little, because there is little voltage above the battery to waste.
A big gap: the further the panel's best voltage sits above the battery, the more a PWM controller leaves unmade, and the more an MPPT controller recovers.
A small array: when there is only room for one or two panels, getting more from each one is the cheapest way to get more power at all.
Battery above the panel: check whether the controller steps down or steps up before you buy it. A step-down MPPT cannot charge a battery that sits above the panel's voltage, whatever its wattage rating says.
To size the panels and a boost controller for a particular e-bike or scooter, use the solar kit builder.
FAQ
Common Questions
What does MPPT stand for?
Maximum power point tracking. A solar panel makes the most power at one particular voltage, called its maximum power point, and that voltage moves with sunlight and temperature. An MPPT charge controller finds that point and keeps following it.
Is MPPT better than PWM?
It depends on the gap between the panel's voltage and the battery's. A PWM controller ties the panel to the battery, so any panel voltage above battery voltage is never turned into power. If the two are close, little is lost and PWM is cheap and does the job. If the panel voltage is well above the battery, or you only have room for one or two panels, MPPT recovers power that PWM throws away.
How much more power does an MPPT controller give?
There is no single figure, because it depends on your panel, your battery and the conditions. The worked example on this page uses a 100 W catalogue panel on a 12 V battery sitting at 13 V: through a PWM controller about 60 W reaches the battery, and through an MPPT controller nearly all of what the panel is making does. With a smaller gap between panel and battery voltage the difference is smaller.
Can an MPPT controller charge a 48 V battery from one solar panel?
Only a boost (step-up) MPPT can. Almost every MPPT controller steps voltage down, so the panel has to be at a higher voltage than the battery. One or two ordinary panels run below the voltage of a 48 V, 60 V or 72 V pack, so a step-down controller has nothing to work with. A boost MPPT steps the voltage up instead.
What voltage should I set an MPPT controller to?
Not a number from this page. The controller's output has to match your own battery's charge voltage, and the authority on that is the DC output printed on the nameplate of the charger that came with the battery or vehicle. Read it there, then verify it by measuring that charger's output plug with a multimeter. If you cannot find the figure, ask the manufacturer rather than guessing.
Does a boost MPPT controller replace my e-bike's own charger?
No. A boost MPPT controller is a DC-DC converter: it takes a panel's output and feeds DC into a simple two-wire charge port, within the limits printed on the vehicle's own charger. Your wall charger still does its job when you have a socket. And a bike whose charge port needs a data handshake with its charger will not accept DC from a controller at all; that kind charges from its own charger only.
Ready to Price Your Solar Kit and Payoff Period?
Pick your e-bike or scooter, choose foldable or rigid panels, and get your complete parts list in seconds.

